Gas fireplace insert installation from our Andover Lakes team
Family-owned gas fireplace insert installation for Andover Lakes homes, with every connection and every trade written into your estimate.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
What goes on paper before a gas insert is installed in Andover Lakes
Our local pros in Andover Lakes record points like these before an insert is ever ordered.
- Damper locked fully open or removed for the liners
- Termination cap sealed and secured to the chimney top plate
- Controls, remote and battery backup explained at handover
- Conversion notice label fixed inside the firebox
What a gas insert job involves in Andover Lakes
A few of the things our installers walk Andover Lakes homeowners through before an insert goes in.
Why the chimney is examined before hookup
Florida's Fuel Gas Code has a rule for exactly this job. Section 503.5.6 says that before an appliance is connected to a chimney, the passageway must be examined to confirm it is clear and free of obstructions, and cleaned if it previously vented a fireplace or another solid- or liquid-fuel appliance.
A chimney that carried wood smoke for years will almost always need that cleaning. We do it as part of the preparation, or list it on the estimate when it is a bigger job, before the insert's liners go down. A new gas appliance never gets connected to a passage that has not been cleaned and checked.
Closing the gap around the liners
Once the liners pass through the damper opening, the space around them can let air move up or down the chimney. The insert manual says non-combustible insulation or field-made metal plates may be needed around the vent pipes at the damper to prevent odors and cold drafts.
In an air-conditioned house, that same gap can let cooled room air escape upward. We close it with the material the manual allows and check it before the surround goes on. The spot is hard to reach afterwards, so it happens in the right order.
Liners that run tight and straight
Flexible liner is easy to push into a chimney and just as easy to leave with a loop or a sag in it. The manual says the vent must not sag below its connection to the appliance, and that excess liner is pushed back up into the chimney without sagging.
A sag can hold condensation and restrict the flow. Our crew sizes the liner to the chimney, keeps it straight through the smoke chamber and checks it from below before the insert is set in place.
Going back to wood later
Undoing an insert conversion takes more than lifting the insert out. The conversion notice says the fireplace cannot be used for burning wood or solid fuels unless all original parts have been replaced and the fireplace is re-approved by the authority having jurisdiction.
That means removing the insert and its liners, restoring the damper and having the fireplace and chimney checked before any wood fire. If you might want a real wood fire again one day, tell us before the conversion so we can talk it through.
Other work in Andover Lakes
-
-
-
-
-
Learn more about gas fireplace insert installationAndover Lakes services
Gas insert questions we hear in Andover Lakes
No sales script, only what we tell homeowners in Andover Lakes at the fireplace.
Does a gas insert need a new cap on the chimney?
Yes. The insert's liners end at a termination cap from the same vent system, sealed to a plate that closes the top of the old chimney. An old chimney cap cannot do that job.
Do I have to remove my mantel for an insert?
Not if it meets the insert's clearance table. We measure its height and depth against the table for your model. If it falls short, we explain the choices before anything is ordered.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.