Local gas insert installation in Bay Hill
A sealed gas insert fitted to your existing fireplace in Bay Hill, with its own vent to the chimney top. Free inspection from our local family team.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
What goes on paper before a gas insert is installed in Bay Hill
Our local pros in Bay Hill record points like these before an insert is ever ordered.
- Rear width and side angles measured, beyond the face of the opening
- Gas supply work by a qualified gas professional, on its own line
- Hearth and floor covering in front of the insert
- Conversion notice label fixed inside the firebox
What a gas insert job involves in Bay Hill
A few of the things our installers walk Bay Hill homeowners through before an insert goes in.
What happens to the old damper
The liners for a gas insert pass through the damper opening on their way up. Heat & Glo tells installers to lock the fireplace damper fully open or remove it completely. A damper left free to swing can pinch the liners or drop onto them later.
Some dampers leave room for both liners once they are locked open. Others are too tight and come out. We decide which at the inspection and describe the choice on your estimate, including any cutting or modification the damper needs.
A gas line sized for the insert
The right size of gas line depends on its length, the other appliances on it and the insert's input. The Supreme manual tells installers to check local codes and gas line sizing requirements following NFPA 54 before connecting.
If your fireplace already has a gas line, nobody should assume it suits the new insert. We check its size and condition first. If it needs to change, the change is on the estimate with the gas professional's name beside it.
The logs that come with the insert
Gas inserts come with their own log set, designed for that burner. The manual gives a numbered position for each log, including how it rests against locating pins and where it must stay clear of burner ports.
Log placement affects the flame pattern and soot on the glass. Our installer sets each log to the diagram and checks the flame at startup. These logs belong to the insert itself, which makes this a different job from adding a loose log set to an open fireplace.
The first long burn
A new insert gives off a smell at first as the paint cures and manufacturing oils burn off. The owner's manual describes a break-in: open windows, run the fireplace three to four hours continuously on high, let it cool, then clean the glass. It also warns that smoke detectors may go off.
We explain the break-in before we leave, so the smell on the first evening comes as no surprise. If you prefer, we start it with you and show you how to clean the glass afterwards.
Other work in Bay Hill
-
-
-
-
- Prefab and Zero-Clearance Fireplace RepairRepair the fireplace according to its model.
- Smoke Chamber RepairRepair the transition above the fireplace opening.
Learn more about gas fireplace insert installationBay Hill services
Common gas insert questions in Bay Hill
Short, straight answers from our fireplace team in Bay Hill. Anything else, just call.
Do I need a new liner for a gas insert?
Yes. A direct-vent insert uses its own liners, one for exhaust and one for combustion air, running from the insert to a cap at the chimney top. They come from the vent system named in its manual.
Will you fit an insert I already purchased?
Gladly, as long as it suits your fireplace. Give us the model number when you call, and the installer reviews its opening and vent requirements before arriving. If it cannot fit, you find out while there is still time to return it.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.