Wood-burning fireplace insert installation in Bryn Mawr
A cleaner, more controllable wood fire behind glass for your Bryn Mawr home, with a workmanship warranty on our work.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Your fireplace insert estimate for Bryn Mawr, item by item
Our family-owned crew measures, notes and explains each point in plain words at your Bryn Mawr home.
- Full-length stainless liner sized to the insert collar
- Old damper locked open or removed
- Hearth depth and width checked, extension if needed
- Manual, model, serial number and liner details left with you
Fireplace insert know-how for Bryn Mawr homes
How the manual, the flue and your fireplace shape the plan in Bryn Mawr.
The metal tag that records the change
When a fireplace has been modified to take an insert, the Pacific guide supplies a metal tag to be fastened to the back wall of the fireplace, so that a later owner or technician can see the fireplace was modified for the insert.
We fasten that tag where the manual directs and point it out at the walkthrough. If the insert is ever removed, whoever takes it out will find the tag before anyone lights a fire in the bare opening, and can have the fireplace checked before it goes back to open burning.
Burning natural, well-seasoned wood
Wood inserts are built for natural wood. The Pacific guide says higher efficiency and lower emissions generally come from air-dried, seasoned hardwoods, compared with softwoods or wood that is green or freshly cut. The Travis manual says its insert is approved for cord wood only.
EPA's wood-burning guidance adds that wood should be split and seasoned for at least six months and tested with a moisture meter before it is burned. We explain what that means for the wood you buy or store, because wet wood undoes much of what a new insert offers.
No liquid starters in a wood insert
The Travis manual states that gasoline or other flammable liquids must never be used to start a fire or to freshen one up, and that they should not be stored or used near the appliance. Other insert manuals carry the same rule.
A fire in an insert starts well with newspaper, small dry kindling and a few small splits, which is how our installers show you the first fire. The door is then closed and the air control does the rest.
Clean-out access and local code
Pacific's guide notes, for both its positive and direct connection methods, that a clean-out door may be required under local codes. The door gives access to the space above the block-off plate, where debris from the old flue can settle.
When local code or good practice calls for one, it goes on the estimate with its location. When it does not, we explain how that space is reached during later sweeping, so the arrangement is serviceable for as long as the insert stays in.
Other work in Bryn Mawr
-
-
-
-
-
Learn more about wood-burning fireplace insert installationBryn Mawr services
Insert questions Bryn Mawr homeowners ask next
What people in Bryn Mawr ask us before an insert is ordered.
Will my hearth be big enough?
Insert manuals set how far the noncombustible hearth must reach in front of and beside the opening, and whether a flush hearth needs to reach further. We measure yours and write any extension into the estimate.
Do I need a permit for an insert?
Insert manuals tell owners to check with local building or fire officials, and requirements differ by jurisdiction. We check what applies at your address and list any permit fee separately.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.