Loose tiles and cracked hearths fixed in Callahan
Our Callahan hearth specialists measure the opening, check the base and repair the finish so the fix lasts.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
The hearth items we measure in Callahan
Your written scope in Callahan lists these items and shows 10% off if you book within 72 hours after the inspection.
- Cracks traced to the finish, the bed or the base
- Support under the hearth checked where access allows
- Gap at the firebox edge cleaned and resealed
- Removal and disposal of damaged material
Our approach to hearth work in Callahan
Each point here can change the scope of a hearth repair in Callahan, and each one appears in your estimate.
How thick a masonry hearth has to be
Section R1001.9.1 of the state's residential building code sets the minimum thickness of a masonry fireplace hearth at 4 inches. That is the solid floor under the fire, built of concrete or masonry and carried on noncombustible support.
Thickness matters on a repair because an old hearth is sometimes chipped down, ground flat or patched over the years. When we open a damaged area, we look at what remains under the finish and tell you whether the base still has the depth the code expects, or whether it has to be built back up before anything decorative goes on top.
When a raised firebox allows a thinner extension
The same code section carries an exception. Where the firebox opening starts 8 inches or more above the top of the hearth extension, a 3/8 inch layer of brick, concrete, stone, tile or other approved noncombustible material is thick enough for the extension.
Many raised fireplaces qualify and many flush ones do not. We measure the height from the extension to the bottom of the opening before recommending a thin replacement finish, because the tile that is fine in front of a raised firebox can fall short in front of one set at floor height.
Finish materials that suit a hearth
Hearth finishes come in many forms. One fireplace maker lists tile, slate, brick, concrete, metal, glass, marble and stone as noncombustible materials that may cover a hearth extension, and each of them repairs in its own way.
At the free inspection our pros identify the material you have, explain how it repairs and show where a patch will be visible. You choose between a spot repair and a wider replacement with the tradeoffs laid out in the estimate.
Adding a border to reach the required size
A hearth extension that falls a few inches short can sometimes be brought up to size with a border of matching or contrasting material, built on the same kind of noncombustible support as the rest of the extension.
The border has to be part of the hearth, set in place and supported, and thick enough for the rule that applies to your fireplace. A strip of tile glued onto the wood floor is decoration only. We draw the border on the estimate with its dimensions so you can picture it before approving.
Other work in Callahan
-
-
-
-
-
-
Hearth repair questions from Callahan
Quick answers from our hearth team in Callahan. Anything else, just call.
Will a hearth repair be dusty?
Removing old tile and setting beds makes dust, so we protect the path to the fireplace, contain the work area and clean up at the end of each visit. We tell you in advance which steps are the dusty ones.
How does the 10% discount work?
Book within 72 hours after your free inspection and take 10% off, and hearth repair counts. Mention it when you book and it appears on your written estimate.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.