Stone chimney repair specialists for College Park homes
Loose stones, open joints and failing veneer repaired by our local family-owned team in College Park, beginning with a free inspection.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Stone and joint checks on your College Park chimney
Stone quotes in College Park follow this order, from water sources to mortar match.
- Loose and missing stones counted and marked
- Replacement stone sourced and compared
- Drainage at the base and terminations checked
- Curing protection for fresh mortar
Getting a stone chimney repair right in College Park
What our specialists in College Park check on every stone chimney they climb.
Full mortar coverage behind each stone
The same instructions require a setting bed with complete coverage of the back of each unit and full contact between mortar, stone and backing. Stones are back-buttered to fill their textured backs, then pressed into a half inch to three quarters of an inch of mortar until it squeezes out around the whole edge.
Stones set with a few dabs of mortar leave voids behind them. Those voids hold water and let stones pop off. When we reset veneer, every stone goes back with full coverage.
A cap that sheds water past the stone
For stone-clad chimney chases, the maker's instructions call for a one-piece cap that extends 1 to 2 inches beyond the finished stone surface, so water drips clear of the stone instead of running down it.
Caps that stop flush with the stone send water straight down the face and into the top joints. When we find that on a chase, the cap goes on the estimate as its own line, next to the stone repair it protects.
Removing caulk and sealant from joints
Caulk pressed into stone joints is a common quick fix for a leak. It seals the joint face while water still moves behind it, it stains stone as it ages and it leaves a surface that new mortar will not bond to.
We cut caulk out completely, scrape the residue off the stone edges and rake the joint to sound mortar before repointing. If the caulk was hiding a leak, the leak goes into the findings with its source.
Spot repointing or the whole face
When a few joints have failed in an otherwise sound wall, spot repointing is sensible. The brief notes that spot repointing is generally preferable, with some color difference acceptable.
Where soft, eroded mortar spreads across a wide area, or old and new joints would clash, repointing an entire face finishes more evenly. We explain which your chimney needs and price both when the answer is close.
Scheduling stone work around cure and cleaning
A stone job has three parts on the calendar, the working days, the first days of curing and the wait before any real cleaning. Planning them together avoids surprises, such as a planned party with fresh joints still covered.
We book the work around your plans and the forecast, tell you when the covers come off and give you the date when the stone can be cleaned beyond a dry brushing.
Other work in College Park
-
-
-
-
-
Stone chimney answers for College Park homeowners
Our family-owned team in College Park hears these stone questions on almost every visit.
Can you replace just the loose stones on my chimney?
Often, yes. When the backing and the surrounding stones are sound, we remove the loose pieces, clean them and reset them in a full bed of fresh mortar. We check why they came loose first, because a stone reset over the same problem will loosen again.
Do you offer a discount on stone chimney repair?
Yes. Book within 72 hours after your free inspection and take 10% off, and stone chimney repair counts. Mention it when you book and it shows on your written estimate.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.