Fireplace repair and maintenance in Colonial Town Center
Stuck damper or cracked firebrick in Colonial Town Center? We name the failed part, fix it and back the work with our workmanship warranty.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Your fireplace repair scope, line by line
- Refractory panels in a factory-built firebox
- Lintel over the opening and where it bears
- Grate size and condition
- Ash dump door and cleanout door
The work behind a fireplace you can use again
A quick fireplace fix still needs the right part
Some fireplace fixes are small. A door knob that fell off, a screen that no longer slides, a grate with a broken leg or a handle pin that worked loose can often be sorted on one short visit. Small does not mean any part will do. The replacement has to suit the heat it sits in and, on a factory-built unit, match the model.
Every replacement is checked against the model before it goes in, and household glue or ordinary fasteners stay out of the hot zone around the opening. If the right piece has to be ordered, you hear what it is, where it comes from and how the fireplace should be used until it arrives.
Even a small fix gets written up, so the next person who services the fireplace knows what changed.
Metal trim and hoods on a factory-built face
The metal pieces around a factory-built opening, such as a trim frame, a hood above the opening or grille panels, are often part of the listed system. Some are there for heat or air flow and not only for looks, and the model's manual says which. Take them off for a new look and the fireplace may no longer match what was tested.
Problems tend to appear after a refacing, when a hood is left off, a grille is painted shut or trim is bent to fit new stone. The fireplace may still light and burn, which is why the change goes unnoticed.
On site, the face is checked against the model's manual. We refit or replace the listed trim and reopen air slots that were closed off. Where a finish sits too close to the opening, the estimate says what the manual requires and what has to change, with each listed part named.
A heat-warped plate in the throat
A damper plate sits right above the fire, and repeated heat can bow it out of shape. A warped plate stops seating on its frame. Light shows around it when it is closed, it may rattle on windy days or catch on the frame when you try to open it.
A slight warp can sometimes be lived with if the damper still opens all the way. A plate that no longer opens fully is a different matter, because the passage above the firebox can then end up smaller than the flue it feeds, which the Florida Building Code does not allow in a masonry fireplace.
Our technician checks the plate against its frame, measures how far it opens and chooses between a new plate, a new damper or leaving it as it is. That choice goes into writing with the reasons, so nobody sells you a new damper for a plate that still does its job.
Refacing a masonry fireplace after the repair
Refacing changes the look of a masonry fireplace with new tile, stone, brick veneer or plaster over the old face. It works well on a sound fireplace and badly on one with hidden damage, because the new face covers cracks and loose joints that still need fixing.
Combustible trim and mantels may only sit so close to a masonry opening under the Florida Building Code, and a new face can change those distances. Thick stone can also narrow the opening or cover part of the hearth extension, which changes the measurements the code cares about.
Our crew repairs the fireplace first, then checks the refacing plan against those distances and the hearth extension. Whoever builds the new face then starts from a sound fireplace and a written list of the limits for your Colonial Town Center home.
Other work in Colonial Town Center
-
-
-
-
-
-
Learn more about fireplace repair and serviceColonial Town Center services
Related fireplace repair work
-
-
-
-
Quick answers on fireplace service in Colonial Town Center
Should I light a fire to show you the problem?
No. Leave the fireplace cold and describe what you saw, when it happened and what the fire was like. Our technician checks it cold, which is safer, and your description fills in how the fire behaved.
Can glass doors be added to my factory-built fireplace?
Only doors the fireplace's manual and listing allow, and a gasketed door only where the fireplace system has been tested, listed and labeled for it, as the Florida Building Code requires. We check the manual before recommending any doors.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.