Fireplace repair with a free inspection in Corner Lake
Same-day fireplace visits when the schedule allows, and a free written estimate before any work starts.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Fireplace repair items we put in writing for Corner Lake
- Refractory panels in a factory-built firebox
- Hearth slab, tiles and the support beneath
- Hearth extension size in front and at the sides
- Glass door frame, panes and tracks
How we repair fireplaces in Corner Lake
Old firebox patches made with the wrong material
Plenty of fireboxes have been patched before. Some patches are sound refractory work. Others are caulk, ordinary mortar, wall filler or a paint-on coating that closed a crack for a season, then cracked, crumbled or peeled away.
Firebrick belongs in medium-duty refractory mortar under the Florida Building Code, so a patch made with something else has to come out before a proper repair goes in. Left in place, it gives the new mortar a poor surface to grip, and the crack can return along the same line.
Old patches give themselves away by color, texture and how they respond to a probe. We cut them out with care for the brick around them. Spots where old patches have failed are marked on the estimate, which shows you why the repair covers more than the crack you first saw.
A smoky or stale smell from the fireplace
A fireplace can smell even when it is cold. A smoky odor can come from deposits in the firebox, the smoke chamber or the flue, carried into the room when air moves down the chimney. A musty smell can point to moisture, damp ash or material that has collected above the damper.
If you regularly see or smell smoke, EPA wood-burning guidance says, you may have a problem, and a cold fireplace that smells deserves the same attention. A damper that no longer seals lets more of that air into the room.
We check the damper seal, the ash and the firebox, look up into the throat and ask when the smell is strongest. Some smells end with a clean-out and a damper that closes properly. If the source is higher up, a chimney sweep or chimney leak repair is written as a separate line on the estimate.
Cooling ashes and a covered metal can
Ashes need time to cool. NFPA advises cooling them first, then moving them to a metal container that sits well away from the house. EPA wood-burning guidance adds that the container should be covered and stored outdoors on a nonflammable surface.
A paper bag, a cardboard box or a plastic bin is the wrong place for ashes, and so is a spot on a wooden deck or beside the garage door.
Our technicians leave the fireplace clean at the end of each repair and carry ashes out in a metal container we bring. If ash has been piling up because the ash dump is jammed or the grate sits too low, we fix the cause and note it in your written record. A shallow ash bed also makes the firebox floor easier to check on the next visit.
Electric units get their own repair visit
Nothing burns in an electric fireplace, so what goes wrong is electrical or mechanical. Flames that go dark, a heater that blows cold air, a remote that stopped responding or a display showing a code are handled by our electric fireplace repair service, working from the maker's instructions.
One rule applies before any visit. Dimplex, as one maker's example, tells owners to plug the unit directly into a wall outlet, never into an extension cord or power strip, and not to run it with a damaged cord or plug. A unit that has been running on a cord should be moved to a wall outlet.
When an electric insert sits in an old masonry opening, the opening itself can still need fireplace repair, such as a loose facing or a cracked hearth. Our technicians in Corner Lake write the fireplace items and the electric unit items as separate lines.
Other work in Corner Lake
-
-
-
-
-
Learn more about fireplace repair and serviceCorner Lake services
Related fireplace repair work
-
-
-
-
Fireplace repair questions in Corner Lake
Do you repair factory-built fireplaces as well as masonry ones?
Yes. We read the label, confirm the model and repair factory-built units with the maker's listed parts, while masonry fireplaces are repaired with firebrick and refractory mortar. The estimate says which approach applies to yours.
Should I light a fire to show you the problem?
No. Leave the fireplace cold and describe what you saw, when it happened and what the fire was like. Our technician checks it cold, which is safer, and your description fills in how the fire behaved.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.