Your fireplace repair team in Dover Shores West
Smoke, smells or a fire that will not draw? We trace the cause at the fireplace and fix what we find.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Parts and finishes on your Dover Shores West fireplace estimate
- The passage from the firebox up past the damper
- Screen mesh, rods and rings
- Blower parts on factory-built wood units
- Insert door gasket and baffle
What goes into a fireplace repair that holds
Masonry fireplace repair works one layer at a time
A masonry fireplace is built in layers. Firebrick laid in refractory mortar lines the firebox, with solid masonry behind it. A hearth of concrete or masonry carries the fire in front. A face of brick, stone or tile finishes the wall, and a noncombustible lintel carries the masonry over the opening. The rules for the firebox lining, the hearth and the lintel all sit in the Florida Building Code section on masonry fireplaces.
Every layer takes a different kind of repair. A crack in the face is not handled like a crack in the firebrick, and a loose hearth tile may point to a problem in the slab beneath it. Masonry fireplace repair starts by deciding which layer the damage is really in.
Every estimate we write in Dover Shores West marks the layer and the material, so the right mortar, brick or tile goes in the right place and nothing is patched with a product meant for somewhere else.
Tracking down parts for a discontinued model
Long after a model leaves the catalog, the fireplace itself can still be in regular use. When a panel, damper part or door is needed for a discontinued unit, the first stop is the maker's own service information and parts channel. A maker may still list a replacement for an older model even when the original part number has changed.
Before telling you a part is gone, our crew checks the label, goes through the maker's documents and asks the supplier. That legwork is part of the job, and it can turn up a current replacement.
If the right part is no longer made, you get a clear choice. A listed part cannot be swapped for a look-alike, so the options become a larger repair the maker supports or a replacement unit. Both options are written out, with what each involves and what stays in place.
Hearth protection in front of a factory-built unit
A factory-built fireplace comes with its own rules for the floor in front of it. The Florida Building Code has its hearth extension installed as the fireplace listing directs, and it has to stand out clearly from the floor around it. Listed hearth extensions comply with UL 1618.
Trouble starts when new flooring runs right up to the opening, a hearth pad is removed during a remodel or tile that matches the floor makes the extension hard to see. The manual for the model sets the size and the materials, and those can differ from the rules for masonry fireplaces.
What is there gets measured against the manual and the listing. If the extension is missing, too small or blends into the floor, we write up a fix that follows the manual, whether that is a listed pad, a new border or a change of material. The measurements go on the estimate too.
Fireplace accessories follow their listing
Glass doors, screens and grates are the add-ons most people mean by fireplace accessories. The Florida Building Code asks for listed and labeled accessories to be installed according to their listing and the maker's instructions. On a factory-built fireplace, the fireplace's own listing also decides which accessories may be added at all.
Trouble shows up when an accessory bought for one fireplace ends up in another, or when parts from different accessory kits are combined. A heat shield left out, a door bracket drilled in the wrong place or a screen that does not cover the opening can each undo what the listing expects. A grate bought for a larger firebox is one example.
Our technicians check accessories against their labels and instructions, refit them correctly and replace any that do not belong. Each accessory we checked is named in writing, along with what, if anything, changed.
Other work in Dover Shores West
-
-
-
-
-
Learn more about fireplace repair and serviceDover Shores West services
Related fireplace repair work
-
-
-
-
Your fireplace repair questions, answered
Will the repaired area match the rest of the fireplace?
We save and reset original tile, stone and brick wherever they are sound, and compare new material in your room's light where they are not. If no close match exists, we tell you before work begins and suggest options such as a border around the opening.
Do I need to be home for the repair?
It helps to be there at the start and the end, so we can agree the scope and walk you through the finished work. In between, you can arrange access, and we let you know when the job is done.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.