Prefab fireplace repair in Dover Shores West

Haze on the door glass that cleaning will not remove

A haze on fireplace door glass that will not come off with cleaning is one of the overfiring signs one maker lists. Ordinary soot film cleans off with the right cleaner.

If the haze stays, we look for other signs of excessive heat before replacing the glass, so the new pane is spared the same damage.

• Haze that cleaning will not lift
• Warped steel near the top
• Cracked or burned-out parts
• Discolored plated trim

Metal chimneys inside a framed chase

Many factory-built chimneys run up through a framed chase, a boxed enclosure that can look like a masonry chimney from outside. The chase has its own top cover, and in one maker's system its own chase-style termination.

The chase itself is house framing and siding, and the chase top cover is a separate job priced on its own line. The prefab repair covers the fireplace, the pipe and the parts of the listed system inside the chase.

When the owner's manual is missing

Manuals go missing when homes change hands. Fireplace makers such as Heat & Glo keep manual libraries online, searchable by model, and the rating plate gives the model name to search for.

We look up the manual for your unit when the plate is readable and bring the relevant pages to the repair. You get a copy of what we used, so the next service visit starts from the same document.

• Model read from the rating plate
• Manual found in the maker's library
• Relevant pages brought to the repair
• A copy left with you

Heat-circulating prefab models

Heat-circulating models are built to pull room air around the firebox and return it warmed through grilles. Their air channels and louvers belong to the tested design and stay as built.

Dust, pet hair and blocked grilles reduce that airflow. We clean what the manual allows, clear the grilles and check that nothing has been added in front of them.

• Grilles and louvers cleared
• Air channels cleaned where the manual allows
• Nothing blocking the openings