Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Local chimney tuckpointing specialists in Eagle Creek

Local, family-owned chimney tuckpointing for Eagle Creek homes. Book within 72 hours after your free inspection and take 10% off.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

What we agree before raking joints in Eagle Creek

Nothing here is estimated from the driveway. Our crew looks closely during the free inspection in Eagle Creek.

  1. Color and sand matched to the old joints
  2. Hand tools for head joints and soft brick
  3. Loose or spalled units priced separately
  4. Crown, cap and flashing items listed apart

Inside a chimney repointing job in Eagle Creek

Practical points from our tuckpointing crew serving Eagle Creek.

A small sample before the whole face

When the look of the chimney matters to you, a small repointed sample settles questions that words cannot. Technical Note 46 recommends mock-ups or sample panels when matching repointing mortar to the appearance of existing mortar.

For your Eagle Creek chimney, our crew can repoint a small, discreet area with the chosen mortar and joint profile. Once it has dried, you see it in daylight next to the old joints and approve it before the rest of the work goes ahead. Adjusting a sample is easy, while changing a whole face afterward is not.

Filling deep pockets first

Where mortar has been removed to more than about an inch, Preservation Brief 2 says those deeper areas should be filled first, compacting the new mortar in several layers before the rest of the joint is brought out.

Deep pockets on your Eagle Creek chimney often sit under the crown or around old damage. Our crew builds them up in stages until they match the depth of the surrounding joints, then fills the whole area together to the face. Filling deep pockets in one heavy layer would invite shrinkage cracks, so they are never rushed.

Crown and cap repairs are listed separately

The crown at the top of a chimney is the roof of the masonry. When it is cracked, water pours into the top courses and wears out the joints there, so repointing below a failed crown only buys time.

If the crown or cap on your Eagle Creek chimney needs work, our estimate lists it as its own item beside the tuckpointing. The Florida Residential Code gives a masonry chimney a cap with a drip edge and a bond break where the flue comes through, and we tell you whether yours has one.

Tuckpointing questions from Eagle Creek

Deciding on joint work? The inspection in Eagle Creek is free.

Can you match an unusual mortar color?

Usually. We adjust the sand and add metallic oxide pigments in small amounts, testing samples wet and dry until the color fits. A small sample area can be repointed for your approval first.

Do I need to be home during the work?

Not for most of it, since the work happens on the roof. We do ask to walk the finished chimney with you, and someone should be reachable if a question about the scope comes up.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376