Family-owned chimney waterproofing in Eagles Nest
Stop guessing about that damp chimney. Our Eagles Nest pros inspect for free and put the fix, and its limits, in writing.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Checked before any repellent goes on in Eagles Nest
Each item below is checked at your Eagles Nest home before any product is chosen, and each one appears in the estimate you approve.
- Product name, chemistry and maker's data sheet
- Surface cleaning needed before application
- Cure time after any repointing or brick work
- Your 72-hour 10% discount shown on the estimate
Chimney waterproofing details that matter in Eagles Nest
A closer look at the work, from our family-owned crew serving Eagles Nest.
Cleaning the chimney before waterproofing
The product has to reach the pores. Makers call for removing dust, dirt, grease, oils, efflorescence, wax, curing compounds, old coatings and anything else that could block penetration. Masonry guidance adds that heavy dirt leads to poor performance and shorter life.
Our crew cleans with methods suited to the masonry, then lets the surface dry. Soot at the top of the chimney, growth on shaded faces and salt streaks all come off first. The cleaning is written into your estimate so you know it is part of the job, not something skipped to save time.
The crown is its own repair
The crown is the sloped slab at the chimney top around the flue. The Florida Building Code, Residential, in section R1003.9.1, wants the top of a masonry chimney pitched so water runs off, with a drip edge at its rim. A repellent sprayed on the brick below does not change any of that.
If the crown is cracked, flat or missing its drip edge, water runs off it and down the chimney faces. We write crown repair on its own line so you can see it clearly. Fixing the crown and then treating the brick below makes more sense than asking a repellent to keep up with runoff it cannot stop.
Caring for the chimney after treatment
A treated chimney needs very little care. Makers of masonry repellents suggest removing anything that could stain or wear the surface as soon as you notice it, and cleaning occasionally with mild detergent and water.
Avoid harsh cleaners and high-pressure washing on the treated faces unless you have checked with us or the product maker first. And when someone offers to seal or paint the chimney again, compare their product with the record we left you. Our team is glad to answer the question over the phone.
Removing growth before treatment
Moss, algae and mildew grow on chimney faces that stay damp, often on the shaded side. Growth holds water against the masonry and blocks the pores a repellent needs to enter.
We clean growth off with methods suited to the brick and mortar, rinse and let the surface dry before applying anything. The growth itself tells us which faces stay wet longest, which helps decide where the treatment matters most and whether something else, like runoff from above, is keeping that face damp.
Other work in Eagles Nest
-
-
-
-
-
Waterproofing answers for Eagles Nest homeowners
If your question is not here, our Eagles Nest team is a phone call away.
Can you waterproof a stucco or stone chimney?
Often, yes, with a product whose maker lists that surface. Stucco cracks and loose stone joints get repaired first. We follow the product's instructions for that material and treat a test area where the result is uncertain.
Our chimney is new. Does it need a repellent?
Usually not. Masonry guidance does not recommend repellents on newly built brick veneer, and well-built brickwork handles water on its own. A new chimney that takes water points to the crown, the flashing or joints that were not filled, and those get checked first.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.