Sealed gas fireplace inserts installed by local pros in Engelwood Park
Our local specialists turn an open fireplace in Engelwood Park into a gas insert you light with a switch or a remote.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Gas insert scope we confirm in Engelwood Park
Items like these make an insert quote in Engelwood Park easy to compare, because each has its own line and its own price.
- Surround size, depth and overlap on the fireplace face
- Mantel and side wall clearances checked against the manual's tables
- Workmanship warranty and the 72-hour 10% discount shown on the estimate
- Conversion notice label fixed inside the firebox
Gas insert installation points for Engelwood Park homes
From the firebox to the chimney top, here is how a gas insert comes together in Engelwood Park homes.
Liners that run tight and straight
Flexible liner is easy to push into a chimney and just as easy to leave with a loop or a sag in it. The manual says the vent must not sag below its connection to the appliance, and that excess liner is pushed back up into the chimney without sagging.
A sag can hold condensation and restrict the flow. Our crew sizes the liner to the chimney, keeps it straight through the smoke chamber and checks it from below before the insert is set in place.
The top plate and cap on the chimney
At the top of the chimney, the liners connect to a termination cap and a plate that closes the old chimney opening around them. The installation manual describes trimming the plate to limit overhang, setting it on a bead of silicone rated for at least 300 degrees continuous exposure and securing the cap to it.
It is roof work, done with care for your roof covering and the top of the chimney. The cap keeps rain and debris out of the old chimney as well as venting the insert, so we seal it to the plate and check that it sits square.
A shutoff valve within reach
Every gas appliance needs its own shutoff valve. Section 409.5.1 of Florida's Fuel Gas Code says the valve must be in the same room as the appliance, within six feet of it, upstream of the connector and accessible. Valves placed in a fireplace firebox follow the appliance maker's instructions.
Inserts often put the valve behind a removable panel or low in the firebox area. We show you where yours is at the walkthrough and how to reach it, including any tool the maker supplies for turning it.
What an insert is designed to heat
A gas insert warms the room it sits in. Heat & Glo states plainly that its Supreme inserts are not intended for use as a primary heat source, and that they are tested and approved as supplemental room heat or as a decorative appliance.
For many homes, that matches how the fireplace gets used on cool evenings. We help you pick a size that suits the room, and we will never suggest an insert can take the place of your home's heating system.
Other work in Engelwood Park
-
-
-
-
-
Learn more about gas fireplace insert installationEngelwood Park services
Engelwood Park homeowners ask about gas inserts
Questions Engelwood Park homeowners ask before converting a fireplace, answered by the installers.
Do I need a new liner for a gas insert?
Yes. A direct-vent insert uses its own liners, one for exhaust and one for combustion air, running from the insert to a cap at the chimney top. They come from the vent system named in its manual.
Why does a new insert smell during the first fires?
The paint and materials cure during the first long burns, and that gives off a smell. Makers describe a break-in burn with the windows open and the fireplace on high for a few hours. The smell fades once the curing is done.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.