Chimney chase repair and rebuilding in Fairview Shores
Your Fairview Shores chase, repaired by a local family-owned company that puts every layer in writing first.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Chase work written up for Fairview Shores homeowners
- Moisture readings across each face of the chase
- Damage boundary marked on each face
- Roofer coordination at the chase base
- Ladder, roof anchor or scaffold access
What a lasting chase repair takes
Matching stucco texture on a partial repair
A patch that is sound but does not match the wall still bothers most people. Stucco texture depends on the finish coat, the tool and the hand of the person applying it, and old stucco has been weathered by years of sun and rain.
Our crew can make a small test area to match the texture before the finish coat goes on the repair. Color is usually handled with paint over the whole face, since new stucco seldom matches weathered color on its own. Sand size and how the finish coat is floated or thrown both change the look, so the test area may try more than one approach.
We tell you before the job whether a patch will blend in or show, and the estimate says whether painting the full face is included. If the chase and house were painted together, we note the paint color so the touch-up matches.
Fiber-cement siding joints on a chase
Fiber-cement siding holds up well on a chase when its joints get the right detail. For panels, R703.10.1 puts vertical and horizontal joints over framing and protects them with caulking, battens, flashing or shiplap. For lap siding, R703.10.2 protects the ends with caulking, an H-section joint cover or a strip of flashing behind the joint. Fasteners follow the code table or the maker's instructions.
An unprotected joint lets water reach the cut edges and the sheathing behind them. Face nails driven too deep break the surface and give water another way in.
We cut and seal new fiber-cement pieces as the maker directs, protect the joints and set nails flush. Paint follows soon after installation, so no bare edge is left out in the weather. The estimate names the siding product and the joint detail we will use. Where old and new pieces meet, the joint is detailed the same way, so the patch does not become the next leak.
Deciding what sound material can stay
Good chase repair removes what is damaged and keeps what is sound. Tearing off more than needed adds cost and adds joints where old meets new. Keeping soft wood to save money brings the rot right back.
The line between the two is set by testing, not by eye. Firm framing with surface staining can stay. Framing that takes a probe, sheathing that has swollen or lost its layers, and siding split at the ends all come out. Stain alone does not condemn a board, and a clean surface does not clear one, which is why every piece near the damage gets tested.
Our technicians explain the line they drew on your chase and why. Sound siding removed for access goes back up where it can, which helps the match. Reused boards are refastened with corrosion-resistant nails and primed wherever they were cut. Reused and new material are listed apart, so you can see how much of the old chase stayed.
A fireplace you never use still has a chase
In some houses the fireplace has sat unlit for years. The chase around its chimney still takes the same rain and sun as the rest of the house, and it can rot just as badly when nobody is watching it.
An unused fireplace can hide a chase leak for a long time, because nobody sees the rust or damp ash in the firebox. The first sign may be a ceiling stain or soft siding.
Our technicians inspect the chase whether or not you burn fires. If you plan never to use the fireplace, we can talk through the upkeep the chase still needs and the options the chimney maker allows at the top. For Fairview Shores homeowners, we treat the chase as a wall that has to stay dry.
Other work in Fairview Shores
-
-
-
-
-
-
Learn more about chimney chase repairFairview Shores services
Chimney chase repair questions in Fairview Shores
Do I need a new cover on top when the chase is repaired?
Only if the cover has failed or no longer fits the repaired top. When it has, the cover goes on its own estimate line and is installed after the top framing is sound. If the cover is in good shape, we take it off carefully and put it back.
How do you price damage you cannot see yet?
The estimate prices what the inspection can confirm and explains how hidden damage is handled. If opening the chase shows more rot, we stop, show you and write up the added work with its price. Nothing extra is done until you approve it.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.