Wall-mounted and built-in electric fireplaces installed in Fairview Shores
Tell us where you want the fire. Our Fairview Shores team handles the framing, the mounting and the finish around the unit.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
What we measure in Fairview Shores rooms before install day
Every line here is part of the free inspection in Fairview Shores, with no charge and no obligation.
- Heater outlet direction and what sits above it
- Finish materials around the unit and where they stop
- Removal and disposal of the old unit or doors
- 10% off shown for work booked within 72 hours
What goes into an electric fireplace install in Fairview Shores
Before you approve an installation in Fairview Shores, these are worth knowing.
When a dedicated circuit is required
Manuals differ on circuits. Dimplex's IgniteXL linear fireplace manual calls for a dedicated, properly fused 15 amp circuit rated for the unit's voltage. The manual for its plug-in XHD firebox says a dedicated circuit is preferred but not essential, and becomes necessary if the breaker trips regularly when the heater runs.
So we never assume. Our crew reads your model's requirement and checks what else shares the circuit you plan to use. If a dedicated circuit is needed, it goes on the estimate as electrical work, done by an electrician, so the fireplace runs its heater without tripping anything.
Outlets above and around the fireplace
Some manuals have specific rules about outlets near the unit. Dimplex's IgniteXL manual, for instance, says not to locate the heater immediately below a fixed socket outlet. A TV outlet placed carelessly above a fireplace can break that rule.
When we lay out a media wall, we mark the fireplace, the TV and every outlet together and check them against both manuals. Outlets for the television, a soundbar or lighting go where the fireplace manual allows. It is easier to get right on paper than to move after the wall is finished.
A breaker that trips when the heater starts
If an installed electric fireplace trips its breaker when the heater comes on, the circuit may be carrying too much. Dimplex's XHD manual says a dedicated circuit will be required if the breaker trips or the fuse blows regularly while the heater runs, because other appliances on the same circuit may exceed its rating.
We check what shares the circuit before recommending a fix. Sometimes the simplest answer is using a different outlet on a lighter circuit. Sometimes a new dedicated circuit is needed. Either way, the recommendation and the electrical work go on the estimate in writing.
Cables for the TV and soundbar
A media wall with a fireplace and a TV quickly fills with cables for power, picture and sound. Loose cables near the heater outlet or bundled across the fireplace face look untidy and can get warm.
We plan cable paths inside the framing, away from the heater discharge, with outlets placed where both manuals allow. Low-voltage runs and power stay separate. The finished wall shows the fireplace and the TV, not the wiring that feeds them.
Other work in Fairview Shores
-
-
-
-
-
-
Learn more about electric fireplace installationFairview Shores services
Electric fireplace installation questions from Fairview Shores
Still deciding? These answers help, and the inspection in Fairview Shores is free.
Can I plug my electric fireplace into a power strip?
No. Makers say to plug directly into a properly grounded wall outlet and never use an extension cord or power strip. If the outlet is in the wrong place, we plan a proper one with an electrician.
Is the electrical work included in your price?
Any electrical work is listed on its own line and done by an electrician. Our crew handles the fireplace, the framing and the finish. You see who does what, and what each part costs, before you approve.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.