Your stone chimney, repaired and repointed in Keene's Pointe
Stone chimney work by local pros in Keene's Pointe who protect your roof, landscaping and walkways while they work.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
What your stone chimney estimate in Keene's Pointe names
Look these over at your pace in Keene's Pointe. The free inspection carries no obligation.
- Natural stone or manufactured veneer identified
- Cap overhang and drip edge checked
- Gutters and runoff onto the stone noted
- Cleaning timed after the mortar hardens
What goes into a stone chimney repair in Keene's Pointe
Any of these can add or remove a line from a stone chimney estimate in Keene's Pointe.
The scratch coat under the stone
Over the lath goes a scratch coat, which one maker specifies at a minimum of half an inch up to three quarters of an inch thick, with enough pressure to fully encapsulate the lath so none is visible. The maker notes that encapsulation and thickness are key to the lath resisting corrosion.
A thin scratch coat with lath showing through is a weak point we look for when veneer fails. Rebuilt areas get a full scratch coat, scored and allowed to set as directed before stone is applied.
Replacing a missing stone
A missing stone leaves the backing or core of the chimney open to rain. We check what is behind the gap first, since damaged backing needs repair before any stone goes back.
If the fallen stone survived, it is cleaned and reset. If not, we look for a replacement close in type, size, color and texture, sometimes from a less visible part of the property or a stone supplier. You see the replacement next to the wall before it is set.
Blending manufactured stone from several boxes
Manufactured stone comes in boxes with a range of sizes, shapes and colors. One maker advises spreading the stone out on site and mixing from different boxes to get a good balance, with small stones next to large ones and heavy textures next to smooth.
For repairs, the same idea applies on a smaller scale. We choose replacement pieces so the repaired patch blends with the pattern around it instead of forming a block of look-alike stones.
Streaks running down from the cap
Dark or white streaks running down a stone chimney from the top show where water is running over the face. A cap without enough overhang or without a drip edge lets water sheet across the top courses and down the stone.
We look at the cap first when we see streaks, then at the top joints below it. The cap or crown repair goes on its own line, and the stone repair below follows once the water is sent away from the face.
Cutting stone safely around your home
Cutting and grinding stone raises fine dust. One maker's instructions caution that dust from cutting its product contains crystalline silica and call for eye protection and a properly fitted respirator when cutting.
We cut outdoors, away from open windows and doors, with wet cutting or dust collection where practical, and keep children and pets well away from the cutting area. Dust is cleaned from walkways and surfaces before we leave.
Other work in Keene's Pointe
-
-
-
-
- Fireplace InstallationPlan the fireplace before opening the wall.
- Fireplace RestorationBring an unused fireplace back with a coordinated plan.
Learn more about stone chimney repairKeene's Pointe services
Your Keene's Pointe stone chimney questions, answered
Short answers from the crew that repoints stone in Keene's Pointe. Call with anything else.
What if stones are falling off my chimney?
Rope off or avoid the ground under the chimney, keep pets inside and leave loose stones alone. Then call us for a free inspection. We check how much has loosened, make the area safe and plan the repair.
How long before new stone joints can be cleaned?
New mortar needs time to harden fully before any cleaning beyond a dry brushing. Preservation guidance suggests about thirty days is usually enough before cleaning a freshly repointed wall, depending on weather and exposure. We tell you when it is safe to clean.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.