Chimney chase repair and framing work in Kingswood Manor

Letting each stucco coat cure before the next

Stucco gains strength as it cures, and the Florida Building Code sets minimum waits between coats. Under R703.7.4, each coat is kept moist before the next one goes on. Under R703.7.5, the finish coat on three-coat work goes on no sooner than seven days after the second coat. Both sections make an exception for work installed per ASTM C926.

Those waits are why a stucco chase repair takes more than one visit. The scratch coat is scored so the next coat grips, and the chase stays covered between visits. On hot or windy days, keeping a fresh coat moist takes more attention, so the crew plans that work for the cooler part of the day where it can.

We plan the schedule around curing time and tell you how many trips the job takes before it starts. The fireplace stays out of use until the wall is closed and the top is sealed, and the timing is part of the written estimate.

Patching chase stucco or stripping a whole side

A small stucco repair on a chase is cut out square, the barrier and lath are lapped into the old, and the coats are built back up. That works when the damage is local and the stucco around it is sound and firmly attached. The edges of a patch are cut back to firm, well-attached stucco, never feathered over a loose area.

When a whole face of the chase is cracked, hollow or stained, patching one spot at a time tends to chase the damage around the wall. Stripping that face lets our crew see and replace every soft sheet of sheathing at once, and it gives a single, even finish.

We explain which approach fits your Kingswood Manor home and why. The estimate prices the patch and, where it makes sense, the full-face option, so you can choose with both numbers in front of you.

Using a hose test to check a chase repair

When a leak has been hard to pin down, a hose test is one way to check a repaired chase. One area is wetted at a time, starting low and working up, while someone watches the attic or the ceiling where the stain appeared. Each area gets enough water to act like a steady rain on that face before the hose moves up.

Testing low first matters. If water is run over the top first, it drains down and wets everything below, and the source gets lost. It also keeps anyone from blaming the top for a leak that starts at the base flashing.

A dry result is a good sign, but a garden hose cannot copy every wind-driven rain, so it confirms a repair rather than guaranteeing it. When a test is part of the job, the estimate says so, and any water it turns up is traced while the tools are still out.

A family-owned crew on your roof

We are a family-owned and operated company, and locally owned. On a chase job, that shows up in how decisions get made. When a question comes up mid-job, like whether a stained stud can stay, you get a straight answer and a written price before anything changes.

Chase repairs run in stages, so there are several of those moments. Our crew shows you what the opened wall looks like, explains where the damage stops and waits for your approval before going past the estimate. You have one company to call about the job, and that company answers for the finished work. Our family-owned team treats a chase repair in Kingswood Manor the way we would want our own house handled, with the yard protected, the debris hauled off and the plan in writing before the first board comes loose.