Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Family-owned fireplace restoration in Kingswood Manor

Fireplace restoration in Kingswood Manor, priced upfront with no hidden fees and backed by a 100% satisfaction guarantee.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

What your Kingswood Manor restoration estimate covers

What we confirm in Kingswood Manor so the finished fireplace does what you expect.

  1. Hearth and hearth extension condition
  2. Mantel and trim distance from the opening
  3. Lintel condition over the opening
  4. Ash dump and cleanout doors

Planning the restoration of your Kingswood Manor fireplace

Plain talk about firebrick, dampers and brick faces from our Kingswood Manor crew.

Finding the label on a factory-built fireplace

The Florida Building Code requires a factory-built fireplace to be listed and labeled, tested to UL 127 and installed under the conditions of that listing. The label names the maker and the model, and it leads straight to the right manual and the right replacement parts.

Labels hide behind grilles, on side panels or under years of soot. Our technicians look for it during the free inspection and record the model in your estimate. When the label is gone, we say so, because a plan for an unidentified unit has limits you should hear about up front.

A worn firebox floor

The floor of the firebox carries the grate, the wood and the ashes, along with years of scraping. Brick there can crack, crumble at the surface or settle unevenly, and a loose floor brick lets heat and embers into the joints below it.

Once the firebox is clean, we check the floor brick by brick. Worn sections are replaced with suitable firebrick and laid to meet the side walls tightly. It is a small part of a restoration in Kingswood Manor, and one you will see every time a fire is lit.

White deposits on fireplace brick

White, powdery deposits on brick are usually efflorescence. Brick Industry Association guidance explains that it needs soluble salts, water to dissolve them and a path for that water to reach the surface. On a fireplace, the water often comes from above.

We brush the deposits off to see the brick beneath, then look for the water source before recommending anything else. Cleaning without stopping the water only resets the clock.

Keeping cooled air out of the chimney

An open or poorly sealed damper lets conditioned air leave the house through the flue whenever the fireplace sits idle. In a home that runs air conditioning for much of the year, that loss adds up.

Part of restoring a fireplace is making sure it closes as well as it opens. We check the damper seal and explain the choices, from adjusting the existing damper to fitting a sealing damper at the top of the flue.

Restoration answers for Kingswood Manor homeowners

Two common questions from our restoration visits in Kingswood Manor.

Do you restore factory-built fireplaces?

Yes, within the maker's listing. Panels, screens and other parts come from the maker's parts list for your model. If a needed part is no longer made, we explain what that means for the unit.

Will the restored fireplace be ready for wood fires?

Yes, when the firebox, damper, smoke chamber and flue all check out. If any part cannot be confirmed, you hear what is missing before the fireplace is called ready for fires.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376