
Vent-free fireplace repair for Lake Como homes
In Lake Como, take 10% off ventless gas fireplace repair booked within 72 hours after the inspection, and the inspection costs nothing.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
What we look at on a vent-free unit in Lake Como
Vent-free units depend on the pilot, the logs and the room together, so the Lake Como visit covers all three.
- Pilot air inlet and orifice checked for lint
- Ignitor, electrode, cable and battery tested
- Room volume measured against the rated Btu input
- Fireplace or firebox listing for vent-free use confirmed
The manual behind every vent-free repair in Lake Como
Each note below comes from a maker's manual or the Florida fuel gas code, and our Lake Como team works to both.
Cleaning an ODS pilot the way the manual allows
Lint at the tiny air inlet of an ODS pilot can weaken its flame and set off shutdowns that look like an air problem. One log set manual recommends blowing the pilot and burner clean with compressed air at no more than 30 PSI, and it warns against using a wire, needle or similar object on the ODS.
Our technicians keep to that limit, because the manual warns that a wire or needle can damage the ODS pilot. If cleaning fails to restore a steady flame, your estimate lists a replacement pilot instead of another round of cleaning.
Forty-two inches from curtains and furniture
Flammable things belong well back from a vent-free unit. Several manuals print the same minimum. Curtains, furniture, clothing and other flammable objects stay at least 42 inches from the front of the appliance, and one log set manual extends that distance to the top and sides.
Furniture creeps closer over the years, and seasonal decorations add more. On every service visit our crew notes what sits inside that zone and leaves a short written note, which costs nothing and can spare a scorched sofa.
Odors from paint, glue and new carpet
A vent-free burner draws in whatever floats in the room air. One manual lists cleaning supplies, paint, paint remover, cigarette smoke, cements and glues, new carpet and textiles as sources of fumes that mix with combustion air and create odors.
The fix is to ventilate the room and pause the odor-causing products while the heater runs. We help you tell a household odor from an appliance problem, and the manual's gas safety steps always come first when the odor could be gas.
Ticking sounds after the fire starts or stops
Metal expands as a vent-free burner heats and contracts as it cools, and that can make a clicking or ticking sound. One manual calls this common with most heaters and suggests calling a qualified service technician only if the noise is excessive.
We listen for the difference between that ordinary sound and a loose part or failing valve. Most owners are relieved to learn the noise is normal, and hearing it from us during a free inspection costs nothing.
Remotes and wall thermostats on vent-free units
Remote controls and wall thermostats are sold as listed accessories for some vent-free fireplaces. One maker offers millivolt wall thermostats, a programmable thermostat and several remote controls for its unvented fireplace.
When a remote stops working, we check the receiver, its batteries and its wiring against the accessory's instructions. Replacement accessories come from the list for your model, and the price is on paper first.
Other work in Lake Como
-
Chimney Animal Removal Resolve an occupied chimney before closing the opening. Learn more
-
Fireplace Hearth Repair Repair the surface and support in front of the fireplace. Learn more
-
Chimney Liner Installation and Relining Plan a liner around the chimney and connected fireplace. Learn more
-
Chimney Sweep and Chimney Cleaning A cleaner flue and a clearer plan for using it. Learn more
-
Chimney Chase Repair Repair the enclosure behind the chimney finish. Learn more
Learn more about ventless gas fireplace serviceLake Como services
Your ventless fireplace questions, answered for Lake Como
Short answers grounded in the manuals and the Florida fuel gas code, from our Lake Como technicians.
Why does my ventless gas fireplace keep shutting off?
On a vent-free unit, the oxygen depletion sensor pilot is usually behind the shutdown. One maker lists too little fresh air, low line pressure and a partly clogged ODS pilot as the causes. Another says not to relight until fresh outside air is provided and to have the unit serviced if it keeps happening.
Can vent-free logs go in a prefab fireplace?
Only when that factory-built fireplace was tested, listed and labeled for unvented use under UL 127, as section 621.7 of the Florida fuel gas code requires. One log set manual adds that it must not go in a factory-built unit whose instructions say it was not tested with unvented logs.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.

