Prefab fireplace replacement and new installs in Lake Copeland
We check the chimney route, the structure and the room in Lake Copeland before you choose. Book within 72 hours after your free inspection and take 10% off.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
The written fireplace scope we leave in Lake Copeland
Book within 72 hours after the inspection in Lake Copeland and 10% off shows on the same page as these items.
- Air space kept around the fireplace and chimney
- Hearth extension built to the manual or code
- Old fireplace and chimney removed and hauled away
- Roof opening closed at the end of each day
Fireplace details our installers explain in Lake Copeland
Useful to know before you approve a fireplace installation in Lake Copeland.
Keeping the new fireplace dry during construction
A fireplace delivered to an open framing job can sit in the rain if nobody plans for it. One maker cautions against exposing its fireplace to the elements and asks that it be kept dry at all times, noting that wet insulation will produce an odor when the fireplace is used.
We schedule delivery for when the unit can go under cover, and a roof opening is closed at the end of each working day. Those small steps keep the first fire from smelling like a wet attic.
No liquid starters, cleaners or colorants
The E-series fireplace is built for solid fuel only. Its manual says never to use gasoline, lantern fuel, kerosene, charcoal lighter fluid or similar liquids, to keep flammable liquids a safe distance away, and not to use chimney cleaners or flame colorants in the fireplace.
We leave a short list of these rules with you at handover. A new fireplace starts easily with newspaper, dry kindling and small splits, which is how we light the first fire with you.
Sealing gaps around the fireplace face
Where the face finish meets a factory-built fireplace, small gaps can let room air leak into the enclosure and cold or humid air leak out. The E-series manual describes sealing those joints with noncombustible sealant, so the face stays tight without trapping heat.
We seal the joints the manual names and leave the cooling slots open, because the two are easy to confuse. The finished edge should look crisp, the doors should close against a clean frame and no gap should whistle when the air conditioning starts.
A raised hearth or a flush hearth
The hearth extension in front of a new fireplace can sit flush with the floor or be raised as a step. Either way it has to meet the manual's size and material rules for your model, and it should read clearly as a hearth rather than a patch of floor that somebody might cover with a rug.
A raised hearth gives a seat and a clear edge, while a flush hearth keeps the floor open. We help you choose based on the room, the flooring and how people walk past, then build it to the manual.
Other work in Lake Copeland
-
-
-
-
-
Learn more about fireplace installationLake Copeland services
New fireplace questions, answered for Lake Copeland
Short answers from our fireplace installers in Lake Copeland. Anything else, just call.
Do you remove the old fireplace?
Yes, when it is part of the scope. We open the face, remove the chimney from the roof down, slide out the old firebox and haul it away, then install and finish the new system.
Why can the chimney not take any path it likes to the roof?
Section R1005.7 holds a factory-built chimney to 30 degrees from vertical at most, with four elbows as the limit for the whole run. If a spot in the room would break either limit, the spot moves. We draw the route before recommending where the fireplace should sit.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.