Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Chimney sweep in Lake Davis/Greenwood with written pricing first

Free inspection, upfront pricing and a 100% satisfaction guarantee on every chimney sweep in Lake Davis/Greenwood.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

The work behind a clean flue

  1. Flue brushed full height with sized brushes
  2. Visual check of everything the brushes reached
  3. Stove connector pipe cleaned and joints reset
  4. Roof area around the chimney covered

Flue cleaning in Lake Davis/Greenwood done with the right tools

What a chimney sweep removes, and what it leaves

A chimney sweep is mechanical cleaning. Brushes and rods break loose the soot and flaky creosote stuck to the flue walls, the smoke chamber, the smoke shelf, the damper and the firebox, and the loosened material is collected and carried out of the house. Nothing is left on the hearth for you to clean up.

What brushing cannot do is repair anything. A cracked tile, an open mortar joint or a rusted damper plate is still there after the cleanest sweep. Hard, glossy deposits that a brush skates over also stay behind until they get a treatment of their own.

Before any brush goes up, our crew in Lake Davis/Greenwood tells you which parts the brushes will reach and which conditions the sweep will not change. That second group is yours to decide on later, and none of it is folded into the cleaning price.

Clearing what falls onto the smoke shelf

Behind the damper, many masonry fireplaces have a flat or curved ledge called the smoke shelf. Anything that falls down the flue can land there, from soot and creosote flakes to leaves, nesting material and broken pieces of tile.

Because it sits out of sight, the smoke shelf can hold a surprising load. Debris left there can smell, can hold moisture and can partly block the path smoke takes into the flue.

The shelf is cleared after the flue is brushed, so it catches the brushing debris too. Our crew reaches over the damper, scoops the shelf clean and vacuums what is left. Whatever came off it is looked at before it is bagged, because a chunk of tile or a rusted piece of metal points to a problem higher up that deserves its own look.

Building a fire that burns clean

A clean-burning fire starts small and hot. EPA guidance says to start fires with newspaper, dry kindling or all-natural fire starters, and never with gasoline, kerosene or charcoal starter. Add split wood once the kindling is burning well, instead of smothering it early.

Keep flammable items such as curtains, furniture, newspapers and books away from the fireplace, the same guidance says. Open the damper fully before lighting, and give the fire enough air to burn brightly instead of smoldering. A sturdy screen goes across the opening once it is lit.

A fire built this way sends less unburned smoke into the flue, and less smoke means less residue left behind. Our technicians see the difference in the deposits from one sweep to the next, and they will gladly walk you through a routine that suits your fireplace in Lake Davis/Greenwood.

Written pricing before any brush goes up

You see the price in writing before the sweep starts. The estimate names the fireplace or stove being cleaned, the flue, the method and anything extra the job needs, such as heavy buildup, a stove pipe to take down or a metal cap to remove and reset.

Upfront pricing means no hidden fees added after the fact. If our crew finds something during the sweep that changes the job, like a glazed section or a stuck damper, they stop and explain it, and it becomes a separate line you approve or decline.

Separate lines also make comparisons fair. If you are weighing our estimate against another company's in Lake Davis/Greenwood, you can see exactly what each price includes and what it leaves out. Nothing is bundled into a package you cannot pull apart.

Your chimney sweep questions, answered

Will a sweep fix a fireplace that smokes?

It fixes the part caused by deposits in the flue. A damper that does not open fully, a clogged cap screen or wet wood can also cause smoke, so we check those too and note the results on the written record.

What should I do before the sweep arrives?

Let the fireplace go cold for at least a day, clear a path to the hearth and move fragile items off the mantel. Keep pets in another room, and leave the damper and any insert as they are for our crew.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376