Gas inserts installed in Lake Eola Heights fireplaces
A gas insert installed to the maker's instructions in Lake Eola Heights, with the barrier screen in place and the controls explained.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Written into every gas insert quote in Lake Eola Heights
What our Lake Eola Heights crew confirms first, so the insert you pick is one that will fit, vent and connect.
- Termination cap sealed and secured to the chimney top plate
- Barrier screen front ordered with the insert
- Removal and disposal of old doors, screen and grate
- Leak check and supply pressure reading at startup
Gas insert know-how for Lake Eola Heights homeowners
The practical side of the job, as our Lake Eola Heights specialists explain it on site.
Each liner on its own collar
Out of the box, the exhaust liner and the intake liner look alike. They do different jobs. The installation manual says to connect the exhaust vent only to the appliance's exhaust collar and the center collar of the termination cap, and the intake only to the inlet air collars.
Our installers mark the two liners before they go down the chimney and check both ends before anything is sealed. It is a simple habit that prevents a fault you would otherwise meet only when the insert refused to run properly.
Small parts that keep the unit sealed
Some inserts include a glass seal plate that must stay in place. The Supreme manual warns that it must be properly installed, because leaving it out raises component temperatures and risks carbon monoxide exposure. It ships already in position.
Parts like this are easy to disturb during installation and service. Our technician confirms the seal plate, the glass latches and the collar slide plate screw before the first lighting, working from the manual's own checklist.
The standard behind a vented gas insert
A direct-vent gas insert is listed as a vented gas fireplace heater. Section 605.1 of Florida's Fuel Gas Code says vented gas fireplace heaters must be listed to ANSI Z21.88 and installed in accordance with the manufacturer's instructions. The Supreme insert's manual shows its listing to that standard.
In practice, that makes the installation manual the rulebook for the job. We work from the manual for your exact model, keep it with your records and leave it in the home when we finish.
Setting the air shutter
Many gas burners have an air shutter that controls how much air mixes with the gas before it burns. Heat & Glo lists the air shutter setting among its installation steps and puts it on the installer's checklist, set according to the type of installation.
The setting affects flame color, flame height and how much soot builds up on the glass. We set it to the manual's figure for your installation and look at the flame again once it has warmed up.
Other work in Lake Eola Heights
-
-
-
-
- Smoke Chamber RepairRepair the transition above the fireplace opening.
- Fireplace RestorationBring an unused fireplace back with a coordinated plan.
Learn more about gas fireplace insert installationLake Eola Heights services
Gas insert questions we hear in Lake Eola Heights
No sales script, only what we tell homeowners in Lake Eola Heights at the fireplace.
Does the chimney need cleaning before the insert goes in?
Yes. Florida's Fuel Gas Code says a chimney that vented a wood fire must be examined and cleaned before a gas appliance is connected to it. We clean it as part of preparing the fireplace.
Do I have to remove my mantel for an insert?
Not if it meets the insert's clearance table. We measure its height and depth against the table for your model. If it falls short, we explain the choices before anything is ordered.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.