Loose stones reset and joints repointed on Lake Holden chimneys
Upfront prices and no hidden fees on stone chimney repair in Lake Holden, with the whole plan on paper first.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Repointing and reset items for Lake Holden homes
Loose stone in Lake Holden traces back to something on this list, and the estimate says what.
- Loose and missing stones counted and marked
- Joint depth and mortar condition checked
- Gutters and runoff onto the stone noted
- Sealer need and product reviewed
Stone chimney repair, explained for Lake Holden homeowners
Stones, joints, cap and base, in the order our Lake Holden team checks them.
Full mortar coverage behind each stone
The same instructions require a setting bed with complete coverage of the back of each unit and full contact between mortar, stone and backing. Stones are back-buttered to fill their textured backs, then pressed into a half inch to three quarters of an inch of mortar until it squeezes out around the whole edge.
Stones set with a few dabs of mortar leave voids behind them. Those voids hold water and let stones pop off. When we reset veneer, every stone goes back with full coverage.
Finding hollow stones by tapping
A stone with voids behind it sounds different when tapped. On a veneer chimney, we tap every stone within reach and mark the ones that sound hollow or move.
One hollow stone in a sound wall may just be reset. A cluster of hollow stones points to a wider bond problem in the setting bed or scratch coat, and the plan changes accordingly. The findings show where the hollow areas are, so you can see why a repair covers the area it does.
Hand tools, grinders and stone edges
The same brief notes that hand chisels and mash hammers, though slow, pose the least threat of damage to masonry units, and that power saws and grinders in unskilled hands can break edges and overcut joints. It advises that power tools never be used on vertical joints.
Stone edges broken by a grinder make joints look wider and weaker. We remove mortar by hand wherever the joint allows and use power tools only on suitable horizontal joints, with care.
What the free stone chimney inspection covers
The free inspection covers the stone type and construction, loose and hollow stones, the joints and earlier repairs, the cap and drip edge, the roof flashing, the base, clearance and drainage on veneer and the runoff around the chimney.
You receive written findings and a written estimate, both at no cost. There is no obligation to book, and the estimate stays valid long enough for you to think it over.
Same-day visits for loose stone
A fallen stone or a piece hanging loose can make you want an answer quickly. Same-day service is available when the schedule allows.
On a same-day visit, we make the area safe first, then inspect the chimney, explain what we see and give you the written estimate as soon as possible. The full repair is scheduled around the weather and your plans.
Other work in Lake Holden
-
-
-
-
-
Stone chimney answers for Lake Holden homeowners
What homeowners in Lake Holden ask while we are up on the roof, answered here.
Can I pressure wash my stone chimney?
We advise against it. One manufactured stone maker rules out power washing, sandblasting, wire brushes and acid cleaners, and high pressure can erode mortar joints on natural stone too. A mild detergent and a bristle brush are the safer start.
How often should a stone chimney be inspected?
Under NFPA 211, a chimney, its fireplace and its vents are inspected every year at a minimum. For a stone chimney, that yearly visit is a good time to tap the stones, check the joints and look at the cap and flashing.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.