Loose stones reset and joints repointed on Lake Mary Jane chimneys
Local experts in Lake Mary Jane who find where water gets behind the stone before resetting a single piece.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Stone findings that shape your Lake Mary Jane quote
Stone quotes in Lake Mary Jane follow this order, from water sources to mortar match.
- Roof, landscaping and walkways protected
- Deep joints filled in layers
- Cleaning timed after the mortar hardens
- Permit requirement checked for rebuild work
Before your stone chimney is repaired in Lake Mary Jane
Stones, joints, cap and base, in the order our Lake Mary Jane team checks them.
What the code says about adhered stone veneer
Section R703.12 of the residential code covers adhered masonry veneer, the category manufactured stone falls into. It accepts the manufacturer's instructions as one installation route, and on framed walls it pairs the veneer with a water-resistive barrier plus a screed or flashing that resists corrosion at the foundation line.
In practice, that makes the maker's installation guide the working document for repairs too. We follow the guide for the stone on your chimney when one is known, and the general standard practice when the product cannot be identified.
Keeping joints narrow and full
For manufactured stone, the maker's instructions say joints should be as narrow as possible, averaging no more than half an inch, and filled completely with a grout bag where more mortar is needed. The setting bed should cover the scratch coat fully so no pockets form behind the stones.
Repairs that leave wide or half-filled joints stand out and let water in. We fill joints completely, match their width to the wall around them and tool them to the same profile.
Pointing joints when they are thumbprint dry
On manufactured stone, the maker's instructions call for joints to be pointed with a wood stick or metal jointing tool once they are firm, or thumbprint dry. Excess mortar is raked out and the edges around each stone compacted and sealed.
Setting times vary with the wall and the weather, so our crew checks joints by touch instead of by the clock. Even, careful jointing is what makes a repaired area read as part of the original wall.
A cap that sheds water past the stone
For stone-clad chimney chases, the maker's instructions call for a one-piece cap that extends 1 to 2 inches beyond the finished stone surface, so water drips clear of the stone instead of running down it.
Caps that stop flush with the stone send water straight down the face and into the top joints. When we find that on a chase, the cap goes on the estimate as its own line, next to the stone repair it protects.
Moss, algae and dirt on stone
Shaded sides of a stone chimney can hold moisture long enough for moss and algae to grow in the joints and on the stone. The growth holds water against the surface and can darken the stone.
We start with the gentlest cleaning that works, water, a mild detergent and a soft or bristle brush, and avoid pressure and harsh chemicals on the stone and joints. Where growth keeps returning, the findings note the moisture that feeds it.
Other work in Lake Mary Jane
-
-
-
-
-
Learn more about stone chimney repairLake Mary Jane services
Asked in Lake Mary Jane about stone chimney repair
What homeowners in Lake Mary Jane ask while we are up on the roof, answered here.
Will the new mortar match the old joints?
We match color, texture and joint profile as closely as we can, mostly by matching the sand. New mortar usually looks a little different at first and blends as it weathers. We show you a small sample area before we repoint the whole section.
What if stones are falling off my chimney?
Rope off or avoid the ground under the chimney, keep pets inside and leave loose stones alone. Then call us for a free inspection. We check how much has loosened, make the area safe and plan the repair.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.