Gas log installation done by the manual in Lake Richmond
An instant fire without the wood. Our local family-owned team measures your fireplace, fits the right log set and tests the flame. 10% off within 72 hours after the inspection.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Line by line, your gas log proposal in Lake Richmond
Four of the fireplace points our specialists note in Lake Richmond, priced line by line wherever work is needed.
- Ash lip or recess at the front of the firebox
- Logs placed to the maker's diagram
- Manual, rating plate and tags left in place
- Removal of the old set if you want it gone
Gas log installation explained for Lake Richmond homeowners
How a gas log installation unfolds in Lake Richmond, and where you make the calls.
How the set lights and what stops the gas
Florida's fuel gas code, in section 602.2, wants the main burner of a decorative set lit by direct ignition, by an igniter or by a pilot, backed by a flame safeguard. Sets listed to ANSI Z21.84, the standard for manually lighted sets, are the exception.
The flame safeguard is what stops gas to the burner when the ignition fails. Our technicians check that it works on every set we install or service, and they do not install a burner that lacks one unless its listing allows it.
Room volume and a vent-free set
Section 621.5 of the Florida fuel gas code sets one shared allowance for every unvented appliance in a room or space, 20 Btu per hour per cubic foot. A set rated at 30,000 Btu per hour needs at least 1,500 cubic feet around it.
Our pros measure the floor area and ceiling height, account for other unvented appliances in the same space and show the arithmetic in writing. Where openings to other rooms count toward the volume, we explain how the manual treats them.
Running a vent-free set with the damper open
Some vent-free sets can also be run as vented appliances. One manual says that in that case the damper must always be open, a damper clamp accessory is installed and the thermostat function is prohibited, so the set is operated manually.
Running vented also removes the need for noncombustible facing above the opening in that manual. Our specialists explain when this configuration makes sense for your fireplace and set it up so nobody closes the damper by mistake.
Keeping the hearth clear
One log set manual asks owners to keep the area around the burner clear of combustible materials, gasoline and other flammable vapors and liquids. Holiday decorations, stacked magazines and stored paint cans all count.
A vent-free manual adds that curtains, furniture, clothing and other flammable objects must stay at least 42 inches from the front, top and sides of the heater. Our crew points out anything too close during every visit.
Low flame height
A flame that stays low when it should be tall usually comes back to gas flow. One maker lists gas pressure, a valve not fully open, a blockage or kink in the connector, plumbing or orifice, a remote left on low and the wrong media for the gas type.
Our crew works through those causes in order, starting with the simple settings. When the supply is the problem, we say so and list the work for the gas contractor separately.
Other work in Lake Richmond
-
-
-
-
Gas log questions from Lake Richmond, answered
Log set questions that come up on visits in Lake Richmond, with plain answers.
Is the gas line part of the job?
New gas piping is separate work for a qualified gas contractor, and it appears as its own line on the estimate. Before that, our crew checks what the log set manual asks of the supply, such as the minimum pipe size and inlet pressure.
Can I still burn wood after gas logs go in?
No. One vent-free manual says solid fuels shall not be burned in a fireplace where an unvented heater is installed, and the same manual says not to burn paper or other objects in it. The log set becomes the fire.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.