Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Gas log installation and replacement in Lancaster Park

Our crew confirms the gas type, the fireplace size and the flue before a log set goes in. Nothing is guessed and nothing is hidden in the price.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

What your gas log installation estimate in Lancaster Park covers

A firebox cannot be sized by eye from across the room. We measure it on site in Lancaster Park during the free inspection.

  1. Minimum damper opening from the set's table
  2. Shutoff valve location and access
  3. Outside air ducts or clean-out doors closed if required
  4. Leak test on every connection made

Getting gas logs right in Lancaster Park fireplaces

Plain talk about gas logs in Lancaster Park, from the people who put them in.

Clamping the damper open for vented logs

Running a vented set against a shut damper is never allowed. One maker ships a clamp with its set, fixed to the damper blade for good, so the damper can never shut past the minimum opening, and it wants the damper wide open whenever the burner is lit.

The clamp is a small part with a big job, since it stops anyone from shutting the damper on a set that is still warm or about to be lit. Our installers fit it, measure the opening and show you where it is.

Fireplaces a vent-free set can go into

One vent-free manual limits its set to a solid-fuel-burning masonry fireplace, a UL 127 factory-built fireplace or a listed ventless firebox enclosure. It adds an exception, never in a factory-built fireplace whose instructions say it has not been tested or should not be used with unvented gas logs.

Those instructions are often on a label inside the firebox or in the fireplace manual. Our crew reads them before a vent-free set is even discussed.

Dual-fuel vent-free sets

Some vent-free sets ship ready for one gas and can be changed to the other. One manual describes a set shipped for propane that a qualified installer can convert to natural gas by following its instructions and markings, with no other field conversion allowed.

Our crew confirms which gas your home uses before installation and completes any conversion the manual allows, then marks the set so the next technician knows how it is configured.

Keeping burner ports and air passages clean

Dust, lint and fallen media find their way into a burner. One maker says all control compartments, burners, air shutters and air passageways must be kept clean and free of obstructions.

The same manual also calls for periodic examination and cleaning of the fireplace venting system by a qualified professional. Our service visits cover both, the burner in the firebox and the flue above it.

A vent-free set that keeps shutting off

The oxygen depletion system on a vent-free set shuts it down when there is not enough fresh air, which one manual describes as the heater needing fresh air ventilation to run properly. A set that shuts off again and again is a signal to check the room before the set.

Our pros look at the room's size, the air supply, drafts across the firebox and the pilot itself. The ODS is never bypassed, and the estimate explains what the fix is and why.

Before your gas log install in Lancaster Park

Answers to what Lancaster Park homeowners ask us about gas logs, from our family-owned team.

Does it matter if my home uses natural gas or propane?

Yes. The set must match the gas named on its rating plate. One vented set is not field convertible at all, while one vent-free set can be converted between the two gases by a qualified installer. One maker also requires the propane supply to be regulated.

Can I still burn wood after gas logs go in?

No. One vent-free manual says solid fuels shall not be burned in a fireplace where an unvented heater is installed, and the same manual says not to burn paper or other objects in it. The log set becomes the fire.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376