Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Chimney crown repair for Lockhart homes

Stop rain at the top of your chimney. Our crown specialists repair, coat or rebuild the crown and leave your roof clean.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

What your crown estimate covers in Lockhart

  1. Crack mapping across the whole crown surface
  2. Height of each flue tile above the crown
  3. Precast crown option where the chimney suits it
  4. Separate lines for cap, flashing or masonry work

How a chimney crown gets fixed properly

Hollow spots under the crown surface

Some crowns look fine but sound hollow when tapped. The top layer has separated from the concrete underneath, usually because water got in and worked between the layers. Those sections can break away without much warning.

Our technicians tap every part of the crown during the inspection, including areas that look perfect. A coating over a hollow surface peels off with the loose layer, so hollow sections change the recommendation to a rebuild. You hear the reason before you approve anything.

Hollow areas often sit near the edges and around the flue, where water enters first. Tapping maps them out, and the pattern shows whether the whole crown is separating or only one area. That pattern is written into your estimate so the recommendation is easy to follow.

Crown coatings and what they can do

Crown coatings are brushable, flexible sealers made for the top of a chimney. They bridge fine cracks and keep rain out of the surface. They do not add strength, rebuild missing concrete or correct a crown with the wrong slope.

We recommend a coating when the crown is sound and the cracks are small. The maker's data for these products calls for a clean, dry, solid surface, and our crew prepares it that way before a brush touches it. You get the product name and care notes at handover.

Coatings also wear with time. Sun and weather work on them, and a crown that was coated once may want a fresh coat later. Our technicians tell you what to watch for, so you can call before the coating gives out instead of after the leak returns.

Damp smells from the fireplace after rain

A musty or damp smell from the fireplace after rain usually means water is sitting somewhere in the chimney. The crown, the cap and the top of the flue are the usual suspects.

Tell us when you notice the smell and how long it lingers. Our technician checks the crown and the flue top during the free inspection and explains how the water is getting in, then what it takes to stop it.

Smells tend to be stronger on humid days, when air moves up and down the chimney. Fixing the crown stops the water, and a damper that closes tightly keeps the smell out of the room. We check both on the same visit.

Crown cracks that continue into the brick

If a crack in the crown lines up with a crack running down the brick, the chimney itself may be moving. That is a masonry question, and the crown is only part of the answer.

Our technicians follow the crack down as far as they safely can and note what they see. If the chimney needs chimney masonry repair or more, we explain it clearly and list it apart from the crown work.

Movement cracks sometimes stop once the cause is addressed, and sometimes they keep growing. Our technicians can record the width of a crack at the inspection, so you have a baseline to compare against later.

Quick answers on chimney crown repair

Is the crown the same thing as the chimney cap?

No. The crown is the concrete slab poured over the masonry at the top, around the flue, while the cap is the screened metal cover that shields the flue opening itself. Many chimneys need work on only one of them. Your written estimate lists each part separately.

How can you tell a crown leak from a flashing leak?

Water from a cracked crown tends to show up inside the flue or the firebox, while flashing leaks usually stain the ceiling or wall beside the chimney. Both can happen at once. Our technician checks the crown, the cap, the flashing and the brick during the free inspection and tells you which one is letting water in.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376