Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Vent-free fireplace repair for Lockwood homes

In Lockwood, take 10% off ventless gas fireplace repair booked within 72 hours after the inspection, and the inspection costs nothing.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

What we look at on a vent-free unit in Lockwood

Every result lands on your written estimate in Lockwood, repair items on one line and code items on another.

  1. Ignitor, electrode, cable and battery tested
  2. Log placement matched to the model's diagram
  3. Screen, hood and glass door arrangement checked
  4. Shutdown tested after any safety part repair

What keeps a vent-free fireplace running clean in Lockwood

Knowledge our Lockwood crew brings to every ventless log set and firebox.

Mantel clearances for a vent-free log set

A log set placed in an existing fireplace has its own mantel rules. One manual calls for noncombustible facing at least 1/2 inch thick, reaching at least 8 inches above the opening, and shows a combustible mantel up to 10 inches deep sitting at least 20 inches above the opening without a hood.

With its 4 inch hood, that figure drops to 18 inches. If a mantel misses both, the manual says to run the logs with the damper open only or to raise the mantel. We measure and explain which applies to your home.

Lava rock and decorative pieces off the burner

Decorative lava rock and small wood pieces have a place, and it is on the fireplace floor. One manufacturer says they belong on the floor of the fireplace or firebox only, never on the burner itself.

Pieces resting on the burner block ports and push the flame out of shape. During service we move them back to the floor, point out any ports they have clogged and clean those ports before relighting.

Soot on the logs means stop and call

A clean vent-free fire leaves clean logs. One maker states that properly installed and maintained log sets do not deposit soot, and that owners who see soot should stop running the set and call for service. Another says to turn the heater off if the logs ever appear to smoke.

Our specialists trace soot to its cause, whether logs, air, pressure, drafts or dust, and put each finding in writing. The inspection is free, and you save 10% on the repair by booking within 72 hours after it.

White powder on the burner or nearby walls

A white residue inside the burner box or on nearby walls often comes from household products. One manual explains that vapors from furniture polish, wax and carpet cleaner turn into a white powder when heated, and says to turn the heater off while using them.

Our technicians clean the residue from the burner area and tell you which habits to change. Once the cause is known, the fix is quick.

Sunken fireplaces and burner airflow

A firebox floor set below the hearth can starve a vent-free burner of air. One maker advises raising the fireplace floor in a sunken fireplace with a secure noncombustible material, to keep airflow adequate and guard against sooting.

Our technicians spot a sunken floor quickly and measure how far it sits below the opening. The raise is priced with its materials, and the burner is tested again once the floor is up.

Your ventless fireplace questions, answered for Lockwood

Short answers grounded in the manuals and the Florida fuel gas code, from our Lockwood technicians.

How big does the room need to be for a ventless fireplace?

Section 621.5 of the Florida fuel gas code limits unvented heaters to 20 Btu per hour per cubic foot of the space. Manuals also use 50 cubic feet per 1,000 Btu per hour of all appliances in the space to decide whether it is confined. We run both calculations during the free inspection.

Is soot on vent-free logs normal?

No. One maker says properly installed and maintained log sets do not deposit soot, and that owners who see it should stop using the set and call for service. Log position, drafts, dust and gas pressure are the usual suspects.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376