Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Fireplace repair for Maitland homes

Fireplace service in Maitland that starts with a free look and ends with a written record you keep.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

The fireplace work we price for Maitland homes

  1. Damper handle, rod, chain or linkage
  2. Outside air control and duct where fitted
  3. Finish work such as grout and tile matching
  4. Items routed to gas, electric or leak services

Fireplace repair, explained for Maitland homeowners

Checking a replace-it quote before you agree

Being told the whole fireplace has to go is a big decision. Sometimes that advice is right. A factory-built unit with a burned-through firebox and no parts left in the maker's catalog may have reached its end. Other times a single failed part has been treated as a reason to sell a new unit.

Our technicians will look at a replacement quote you already hold and at the fireplace behind it. We check whether the fault sits in a part that can still be sourced, whether the listing allows a repair and whether the masonry or the unit around it is sound.

You get our view in writing, with a repair option where one exists and a plain statement where it does not. That second look is part of our free inspection for homes in Maitland, so checking before you sign costs nothing.

Raised hearths that crack or pull loose

A raised hearth lifts the fire and gives the room a seat or a ledge. It is also a box of masonry or framing with a finish on top, and those parts can separate. Cracks along the front edge, a loose top slab or a gap where the hearth meets the wall are the signs to look for.

Hearths used as seats or steps take loads they may not have been built for. The Florida Building Code asks hearths to be reinforced to carry their own weight and all imposed loads, and a raised hearth that has settled or cracked is worth checking below the surface as well as on it.

Our crew checks what the raised hearth is built from and whether the top is still properly supported. For homes in Maitland, the repair might be a new top slab, reset stone or a rebuilt edge, and each is written up with the materials named.

Wax and sawdust logs belong in open fireplaces

Manufactured firelogs made of wax and sawdust are convenient, but EPA wood-burning guidance says many are made for open-hearth fireplaces only. They should not go into a wood stove or a fireplace insert unless its instructions allow them.

For open fireplaces, EPA advises following the log maker's instructions and burning one log at a time, both for cleaner air and for fire safety. Stacking several at once goes against that advice.

If you have a factory-built fireplace, its manual may give its own guidance on firelogs, and our technicians check it whenever a customer asks. If firelog residue or signs of overheating turn up during a repair, we explain what we saw and add a note for your fireplace to the written record. That note covers the fuel your model is meant to burn.

A sweep before the first fire after repairs

Fireplace repairs fix what can be seen and reached from the room. The flue above still needs its own attention, and NFPA 211 calls for chimneys and fireplaces to be inspected yearly and cleaned when needed. If the fireplace has been idle or the flue has gone a long time without sweeping, a sweep before the first fire makes sense.

Repair work can also disturb what sits above. Work on the damper, the throat or the firebox can loosen soot and debris, and it is better cleared before a fire than drawn back down during one.

Our chimney sweep service can follow the repair on the same visit or soon after. The sweep appears as its own line, so you can choose it or skip it if the flue was cleaned recently.

Questions to ask about fireplace repair

Do you work on gas or electric fireplaces?

Those units go to our gas fireplace repair and electric fireplace repair services, which work from the makers' instructions. This repair service still handles the hearth, facing, mantel and masonry around them, and one estimate can cover both.

Can glass doors be added to my factory-built fireplace?

Only doors the fireplace's manual and listing allow, and a gasketed door only where the fireplace system has been tested, listed and labeled for it, as the Florida Building Code requires. We check the manual before recommending any doors.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376