Propane and natural gas fireplace installation in Merrimac
Propane or natural gas, a gas fireplace installed right in Merrimac, with the controls explained before we leave.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Planned at your Merrimac home before the wall is opened
Points our Merrimac team settles early, so the fireplace you choose can be framed, vented and connected as planned.
- Termination cap location against the clearance table
- Wall or roof penetration framed with its heat shield or firestop
- Noncombustible facing and finish materials near the opening
- Barrier screen and front ordered with the fireplace
Gas fireplace details our Merrimac team never skips
Each point comes from fireplace manuals or the gas code, and each one shapes your plan in Merrimac.
What the fireplace sits on
The floor under a gas fireplace matters. Hearth & Home's Novus manual says to install the appliance on a hard metal or wood surface extending the full width and depth of the unit, and not directly on carpet, vinyl, tile or any combustible material other than wood.
On a slab or a finished floor, that usually means a wood platform built to the right height. We build it as part of the framing, so the fireplace sits level at the height you want to see the flame.
Counting elbows and diagonal runs
Elbows change how a vent run is counted. The Novus manual allows two 45 degree elbows in place of one 90, and explains that on a 45 degree run, one foot of diagonal counts as eight and a half inches of horizontal run and eight and a half inches of vertical rise.
Those details decide whether a route around a beam or a window is allowed. Our installers do the arithmetic on paper first and measure from the appliance's outer wrap, as the manual specifies, when the pipe goes in.
A supply line sized for the load
Gas lines are sized for the total demand of every appliance on them and the length of the run. A fireplace added to an existing system adds to that load, and an undersized line shows up as low pressure when other appliances run.
The gas professional sizes the line to the fuel gas code, and we give them the fireplace's input from the rating plate. The result appears on your estimate as its own item.
Other work in Merrimac
-
-
-
-
- Smoke Chamber RepairRepair the transition above the fireplace opening.
- Fireplace InstallationPlan the fireplace before opening the wall.
Learn more about gas fireplace installationMerrimac services
Related gas fireplace install work
Questions we hear in Merrimac about gas fireplaces
Weighing up a new fireplace? Start here, then book the free visit in Merrimac.
Can I reuse the vent from my old gas fireplace?
Only if the new model's manual lists that exact vent system and the pipe is in good condition. Otherwise the new fireplace gets new pipe from its own system. Mixing systems voids warranties and can affect safety.
Why is there fog on the glass when I start it?
Burning gas produces moisture, and it can condense on cool glass until the fireplace warms up. In summer, glass cooled by air conditioning makes it more noticeable. It clears as the glass heats.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.