Loose tiles and cracked hearths fixed in Merrimac
Your hearth in Merrimac, repaired cleanly with matched materials and a workmanship warranty on our work.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Your Merrimac hearth estimate includes
A short list, and each item on it changes the price and the result in Merrimac.
- Cracks traced to the finish, the bed or the base
- Replacement tile, brick or stone sourced and matched
- Removal and disposal of damaged material
- Curing time before the next fire
Hearth know-how from our Merrimac crew
Each point here can change the scope of a hearth repair in Merrimac, and each one appears in your estimate.
Adding a border to reach the required size
A hearth extension that falls a few inches short can sometimes be brought up to size with a border of matching or contrasting material, built on the same kind of noncombustible support as the rest of the extension.
The border has to be part of the hearth, set in place and supported, and thick enough for the rule that applies to your fireplace. A strip of tile glued onto the wood floor is decoration only. We draw the border on the estimate with its dimensions so you can picture it before approving.
The ash dump door in the hearth floor
Some masonry fireplaces have an ash dump, a small cast-iron door in the inner hearth that drops ashes into a chamber below. Its frame can loosen in the masonry, and the door can warp, rust or go missing.
A loose or missing ash dump door leaves an opening into that chamber. We reset or replace the frame and door with a fitting unit and seal it into the hearth floor. If you no longer use the ash dump, we can discuss closing it properly as part of the work.
- Frame reset or replaced
- Door replaced with a fitting unit
- Sealed into the hearth floor
- Closed off if you no longer use it
Permits for hearth work
Whether hearth work needs a permit depends on the scope and on the building department that covers the address. Replacing a few tiles is one thing, and rebuilding an extension or changing its size can be another.
We check the requirement for your address when the scope calls for it and build any permit step into the plan. You know before work starts whether a building department inspection is part of the job.
Who does the work on your hearth
Hearth repair mixes masonry, tile setting and fireplace knowledge. Our family-owned team handles all three, from reading the fireplace's manual or code section to setting the last edge piece.
The same people who measure at the free inspection explain the scope, and the crew that arrives works from that written plan. Should anything be wrong when we finish, our 100% satisfaction guarantee has us back to correct it.
- Masonry, tile setting and fireplace knowledge
- The same people from inspection to handover
- Work done from the written plan
Other work in Merrimac
-
-
-
-
-
Hearth repair questions from Merrimac
Still deciding? These answers help, and the hearth inspection in Merrimac is free.
Why do some of my hearth tiles sound hollow?
A hollow sound means the tile has lost its grip on the setting bed beneath it. Hollow tiles tend to crack at the corners, so we reset them in full contact during the repair.
Can a cracked stone hearth slab be saved?
A tight crack in a well-supported slab can often be filled and left in place. If the pieces move, the slab is lifted and re-bedded, or replaced when the break is too severe.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.