Loose stones reset and joints repointed on MetroWest chimneys
Know the findings, the options and the price for your MetroWest stone chimney before you say yes to anything.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Stone and joint checks on your MetroWest chimney
Stone quotes in MetroWest follow this order, from water sources to mortar match.
- Solid stone or facing over a backing noted
- Joint depth and mortar condition checked
- Deep joints filled in layers
- Flue and liner work listed separately
Getting a stone chimney repair right in MetroWest
Straight from stone jobs around MetroWest, the details that set your repair plan.
The top of a solid stone chimney
Section R1003.9.1 of the residential code tops a masonry chimney with concrete, metal or stone, edged with a drip, and seals a bond break with caulk at every flue liner per ASTM C1283. A stone chimney is covered by that rule.
A cracked cap, a missing drip edge or a failed bond break lets water into the top courses, where it works down behind the stone. We inspect the top every time and quote cap or crown work separately from the stone.
Blending manufactured stone from several boxes
Manufactured stone comes in boxes with a range of sizes, shapes and colors. One maker advises spreading the stone out on site and mixing from different boxes to get a good balance, with small stones next to large ones and heavy textures next to smooth.
For repairs, the same idea applies on a smaller scale. We choose replacement pieces so the repaired patch blends with the pattern around it instead of forming a block of look-alike stones.
Ledgestone and stacked courses
Ledgestone styles are laid in long, level courses, and one maker's directions say they should be installed from the bottom up, keeping each course level and plumb, with long pieces run horizontally.
A loose or missing piece breaks the line and is easy to spot. We reset pieces level with their neighbors, trim replacements to the course height and check alignment as we go, so the repair disappears into the pattern.
Water stains inside near a stone chimney
Stains on a ceiling or wall beside a stone chimney can come from the flashing, the cap, open joints or water behind veneer. The stain inside does not always sit directly below the entry point.
We check the outside of the chimney from the roof and the base, and the attic where it is accessible, to find the path. Leak repairs that are not stone work, such as flashing or cap work, are quoted on their own lines.
Veneer set on old brick or block
Stone veneer can be applied directly to clean, untreated, unpainted masonry or concrete. The maker's instructions we follow note that painted, sealed, dirty or smooth surfaces need extra preparation, and recommend a site evaluation for existing unit masonry and engineering review for existing stucco.
When veneer on a masonry chimney lets go, the surface behind it is often the reason. We look at it closely before resetting anything and explain the preparation it needs.
Other work in MetroWest
-
-
-
-
-
Stone chimney answers for MetroWest homeowners
Our family-owned team in MetroWest hears these stone questions on almost every visit.
Can you repair cultured stone on my chimney?
Yes. Manufactured stone is repaired to its maker's directions, which cover the backing, the setting bed, joint width and cleaning. We remove loose units, check what is behind them and reset or replace them with full mortar coverage.
How often should a stone chimney be inspected?
Under NFPA 211, a chimney, its fireplace and its vents are inspected every year at a minimum. For a stone chimney, that yearly visit is a good time to tap the stones, check the joints and look at the cap and flashing.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.