Loose chimney stucco repaired to match in Mills 50
Same-day service available in Mills 50. We secure loose stucco, plan the repair and leave the yard clean.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Stucco repair items we price for Mills 50 homes
Measured and noted by our family-owned team in Mills 50, then explained in plain language.
- Hollow or loose areas found by sounding each face
- What the stucco is applied to, masonry or lath
- Flashing at the roof line, priced separately
- Number of visits the coats require
The way we handle stucco chimneys in Mills 50
Where your own choices come in on a stucco job in Mills 50.
Why the number of stucco coats matters
Section R703.7.2 of the Florida residential code calls for at least three coats of cement plaster over lath and at least two coats where plaster goes directly onto masonry or concrete. A repair should rebuild the same build-up it replaces.
A thin skim of patch over a lathed wall leaves the repair weaker than the stucco around it, and it tends to crack along the outline. Your written estimate states how many coats each repair area gets and what each coat does. Where the existing stucco is thicker or thinner than usual, the repair follows what is actually on the wall.
When a whole chimney face should be redone
On a highly visible face, the Park Service guidance notes that restuccoing an entire section can beat scattered patches, because the differences between old and new become less apparent.
If several patches would dot one face of your chimney, we price a full-face option next to the patch option. You choose with both numbers in front of you, and we explain the look to expect from each. On a face that nobody sees from the street or the yard, a well-made patch is often the sensible choice.
Outside parging is not smoke chamber parging
Parging on the outside of a chimney is a weather finish. Parging inside the smoke chamber above a fireplace is a different job with heat-rated materials, and it is its own service.
If you have been told the chimney needs parging, we find out which one was meant. Your estimate names the exact location of the work so there is no confusion later. Both can appear on one estimate when both are needed, each on its own line with its own price.
Vines and shrubs touching the stucco
Plants growing against the chimney hold moisture on the finish, and roots or tendrils can work into cracks. The Park Service guidance names intrusive vegetation among the causes of stucco deterioration.
We point out contact areas and suggest trimming back before the repair day. We work around your plants with care and protect them while we cut and mix. Roots that have already opened cracks are removed carefully before the repair area is prepared.
Other work in Mills 50
-
-
-
-
-
What Mills 50 homeowners ask about stucco repair
Straight answers from our specialists in Mills 50, with no sales pressure.
How do you know what is under my chimney stucco?
We sound the finish, look at edges and openings and check the chimney from the roof and, where possible, the attic. That usually tells us whether the stucco sits on block, brick or a framed chase with lath. If a small test opening is needed to be sure, we ask before making it.
What causes rust stains on chimney stucco?
Usually corroding metal inside the finish, such as lath, fasteners or corner bead. Painting over the stain hides it only for a while. We find the rusting metal, replace it in the repair area and rebuild the stucco around it.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.