Local gas insert installation in Oakshire
Call our family team in Oakshire for a free inspection, then take 10% off gas insert work you book within 72 hours after it.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Before we order an insert for your Oakshire home
In Oakshire, the free visit covers points like these, and none of it obliges you to book.
- Termination cap sealed and secured to the chimney top plate
- Gas supply work by a qualified gas professional, on its own line
- Shutoff valve location and service slack in the gas line
- Hearth and floor covering in front of the insert
How our Oakshire crew fits a gas insert
A few of the things our installers walk Oakshire homeowners through before an insert goes in.
Why the back of the firebox matters
Many fireboxes are wider at the front than at the back, with angled side walls and a back wall that leans forward near the top. The insert itself is a rectangular unit, so its rear corners and top have to clear those angles, which is why manuals list a rear width as well as a front width.
Our technicians measure at several points, front to back and floor to lintel, and compare every number with the manual. The face of the opening alone says little about whether an insert will slide in and sit level.
A path for the gas line in a factory-built firebox
A factory-built fireplace may have no hole for a gas line. The Supreme manual allows an access hole of one inch or less to be drilled through the lower sides, back or bottom of the firebox, within its lower half, and says the hole must be plugged with non-combustible insulation once the line is through.
We mark the location with the gas professional before anyone drills, so the line reaches the insert's connection without crowding the surround. The sealed hole is checked again at the end of the job.
Moisture on the glass at startup
Water droplets on the inside of the glass when the insert first lights are a normal result of burning gas. Heat & Glo's owner's manual adds a point for summer: warm, humid outdoor air inside the firebox can condense on glass that air conditioning has cooled below the dew point.
The moisture clears as the glass warms. We mention it at handover, so nobody mistakes it for a crack or a fault on a muggy evening.
Swapping a wood insert for a gas one
Some fireplaces already hold a wood-burning insert. Replacing it with gas means taking out the wood insert and its chimney liner, then installing the gas insert with its own listed vent system.
They are different appliances with different vents, and the old wood liner cannot stand in for the gas insert's direct-vent liners. We clean and check the chimney once the wood insert is out, before the gas insert goes in.
Other work in Oakshire
-
-
-
-
- Fireplace InstallationPlan the fireplace before opening the wall.
- Stone Chimney RepairKeep stone repairs suited to the existing masonry.
Learn more about gas fireplace insert installationOakshire services
Gas insert questions we hear in Oakshire
No sales script, only what we tell homeowners in Oakshire at the fireplace.
Does the chimney need cleaning before the insert goes in?
Yes. Florida's Fuel Gas Code says a chimney that vented a wood fire must be examined and cleaned before a gas appliance is connected to it. We clean it as part of preparing the fireplace.
Can I still burn wood after a gas insert is installed?
No. The converted fireplace is labeled for gas insert use only. Going back to wood means removing the insert and its liners and having the fireplace and chimney approved again.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.