Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Wood-burning inserts installed by local specialists in Orwin Manor

A cleaner, more controllable wood fire behind glass for your Orwin Manor home, with a workmanship warranty on our work.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

Your fireplace insert estimate for Orwin Manor, item by item

Our family-owned crew measures, notes and explains each point in plain words at your Orwin Manor home.

  1. Chimney height checked against the model's minimum
  2. Full-length stainless liner sized to the insert collar
  3. Outside air or room air route per the manual
  4. Gas line in the firebox capped by a gas contractor, listed separately

Fireplace insert know-how for Orwin Manor homes

How the manual, the flue and your fireplace shape the plan in Orwin Manor.

One appliance to one flue

Pacific prints the warning in capitals: do not connect the insert to a chimney flue serving another appliance, and the Travis manual repeats it. A water heater or furnace vent sharing the flue would mix exhaust streams with very different temperatures and draft needs.

Some chimneys carry two or more flues side by side behind the same brick. Before planning the liner, our crew identifies which flue belongs to the fireplace and whether anything else is tied into it, so the insert gets a path to the top that is its own.

Comparing two models for the same fireplace

Two inserts with similar heat output can differ in their minimum fireplace sizes, mantel and side clearances, hearth requirements, flue size and blower power. Those differences, more than the brochure photo, decide which one suits a given fireplace.

When you are torn between models, our specialists set them side by side against your measurements and explain the installation each would need. Sometimes the cheaper unit costs more to install, and sometimes the reverse, and you should know which before choosing.

The chimney top once the liner is in

A liner finishes with its own top plate and cap. An existing chimney cap sized for the old flue may sit in the way, or may no longer close the top properly once the liner passes through it.

We look at the existing cap during the inspection and explain whether it stays, gets modified or is replaced. Any change is written into the scope, so the top of the chimney is closed and protected when the crew climbs down.

Keeping birds and animals out of the chimney

An open flue is an invitation to birds and small animals, and a nest in the space around a new liner is hard to reach. The top plate and the rain cap together close the top of the chimney around the liner.

We check for nesting before any work starts, because active nests of some protected species change what can be done and when. When the top is finished, it should leave nothing for an animal to enter.

Asked by Orwin Manor homeowners before an insert goes in

What people in Orwin Manor ask us before an insert is ordered.

Should I buy the insert before you measure?

It is better to measure first. The manual lists minimum fireplace sizes, chimney height, flue size and clearances, and we check all of them against your fireplace so the model you buy is one that fits.

Does the insert blower need a special outlet?

It needs a properly grounded outlet within reach of its cord, wired to code. If there is no suitable outlet, an electrician adds one as separate work with its own line on the estimate.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376