Chimney masonry repair for homes in Park Lake/Highland
A sound chimney above your roof. Book a free masonry inspection in Park Lake/Highland, then take 10% off any service you book within 72 hours after it.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Masonry details we put in writing in Park Lake/Highland
Our family-owned crew in Park Lake/Highland marks the repair area before these lines are written, so the price holds.
- Joint profile matched to the original
- Curing and weather planning for fresh mortar
- Stucco, stone or historic work referred separately
- 10% off within 72 hours after the inspection, shown on the estimate
Before you repair chimney masonry in Park Lake/Highland
Questions every Park Lake/Highland homeowner should have answered before chimney masonry is cut out.
Packing new mortar in layers
New mortar goes into a deep joint in layers, not all at once. The guidance calls for packing it tightly in layers no more than a quarter inch thick, with each layer allowed to firm up before the next.
Layering keeps the mortar dense and reduces shrinkage cracks in the finished joint. It takes longer than filling a joint in one pass, which is one reason a proper repointing estimate reflects more time than a quick patch. The first layers fill the deepest part of the joint, and only the final layer is tooled to the finished profile.
Softer mortar in older masonry
Mortar laid before the early 1900s, Technical Note 8B notes, was mostly lime, with little or no portland cement, and has lower strength than modern mixes. Repairing that masonry with a strong modern mortar can damage it.
Type O is often used for repointing older brickwork, and ASTM C1713 covers mortars for historic masonry. When a chimney calls for that kind of work, we tell you so, since historic restoration follows its own methods.
Coatings are not a substitute for flashing
Water repellents and coatings, according to Technical Note 46, should not replace, or be considered equivalent to, essential code-required details that resist water penetration, such as flashing and weeps.
On a chimney, that means a coating cannot fix a failed flashing joint at the roofline or a cracked crown. When those are the real problem, we say so and quote them separately rather than selling a coating in their place. A coating over a flashing problem can even hide the leak for a while, which makes the real repair harder to find later.
Mortar grit inside the house
Sand or grit on the hearth, or mortar pieces in the firebox, can come from joints deteriorating inside the chimney, around the smoke chamber or at the firebox itself.
We trace where the material is coming from before recommending anything. Chimney masonry, smoke chamber repair and firebox repair are separate jobs, and the right one depends on where the grit started. Keep a sample of the grit if you can. Whether it is sandy mortar, brick dust or firebrick tells us a good deal before we look up the flue.
Other work in Park Lake/Highland
-
-
-
-
-
Learn more about chimney masonry repairPark Lake/Highland services
Related chimney masonry work
Masonry questions we hear in Park Lake/Highland
Question not listed? Our Park Lake/Highland masonry team is glad to answer it by phone.
How do I get 10% off masonry repair in Park Lake/Highland?
Book within 72 hours after the free inspection and ask for it when booking. The 10% discount then appears on the written estimate.
Is your chimney masonry work guaranteed?
Yes. Masonry we repair is covered by our workmanship warranty, and if you are not satisfied, our 100% satisfaction guarantee has us back to make it right.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.