Local firebox repair in Pine Hills
Old patches come out down to sound brick, so the repair you pay for has something solid to hold.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Firebox items we inspect at no charge
- Raking out and repointing worn joints
- Failed patch and wrong material removal
- Soot brushing where assessment needs it
- Brick count and joint length on the estimate
Repairing the lining that holds the fire
Impact damage from logs and tools
Not every cracked firebrick comes from heat. A heavy log dropped onto the floor, a poker used as a pry bar or a grate dragged across the bricks can chip and crack them.
Our technicians look at the pattern of damage to tell impact from heat. Chipped floor and lower wall bricks are usually straightforward to replace, and we suggest simple habits that keep the new brick in one piece.
The fireplace stays cold before the visit
Firebox repair needs a cold fireplace. Mortar will not bond to hot brick, and nobody can work safely inside a firebox that is still holding heat from last night's fire.
Please skip fires for the day or two before your appointment. If that is not possible, tell us when you book, and we plan the visit so the brick has time to cool before our crew starts.
Keeping mortar dust and soot contained
Cutting out brick and raking joints creates fine dust. We use drop cloths, work from inside the opening and clean as we go so the dust stays in the firebox instead of the room.
Tell us when you book if anyone at home has breathing troubles or allergies. The crew can close off the opening more fully, group the dustiest steps together and ventilate the room when the work is finished.
The steel angle over the opening
Many masonry fireplaces carry the brick above the opening on a steel angle. Heat and moisture can rust it, and a rusted angle can sag or crack the brick it supports.
We look at the angle during a firebox visit. If it is rusted or sagging, that is noted and quoted as its own item, separate from the lining, because it involves the facing above the opening.
The ash chamber below the firebox
On fireplaces with an ash dump, ashes fall into a chamber below the firebox, usually with a cleanout door on the outside of the chimney. When that chamber is full or damp, it can affect the firebox floor above it.
We check the ash dump from the firebox side and ask about the cleanout below. A full chamber should be emptied, cold, before the floor is repaired, and any damage there is noted separately.
Other work in Pine Hills
-
-
-
-
-
-
Firebox repair, the short answers
Why can't ordinary mortar be used inside the firebox?
Ordinary mortar is made for normal temperatures and can crumble after repeated fires. The Florida residential code calls for firebrick to be laid with medium-duty refractory mortar, and that is what our crew uses.
Why is there water in my firebox after rain?
Water in the firebox usually comes down the flue from above, often past a missing or damaged cap. We repair the firebox and quote the source separately, so the new work is not soaked again.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.