Gas fireplace inserts fitted for Richmond Heights homes
A gas insert installed to the maker's instructions in Richmond Heights, with the barrier screen in place and the controls explained.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
The fit check for your Richmond Heights fireplace
Four checks from a typical gas insert visit in Richmond Heights. Your own estimate lists every item that applies to your fireplace.
- Firebox width, height and depth against the insert's minimum opening
- Rear width and side angles measured, beyond the face of the opening
- Plates or insulation closing the gap around the liners at the damper
- Outlet inside the firebox or a cord route to a nearby outlet
Inside a gas insert installation in Richmond Heights
Written by the family-owned crew that fits gas inserts across Richmond Heights.
How the surround changes the depth you need
The surround, a metal frame fitted around the insert's face, hides the space left between unit and fireplace, and its depth changes how deep the firebox has to be. In Heat & Glo's Supreme manual, standard surrounds are seven-eighths of an inch deep, custom surrounds up to three inches deep reduce the usable depth, and a flush surround built on site adds depth back.
That gives some room to work with a shallow firebox. We match the surround to your measurements and your fireplace face, and name the surround on the estimate so there is no guesswork when the boxes arrive.
How a wall switch is wired
A wall switch for a gas insert is a low-voltage control. The manual is specific: do not wire 110 to 120 volts to the wall switch, and do not connect the power cord of an electronically controlled insert to a switched circuit, because that can override its safety lockout.
If you want a wall switch, we fit the maker's switch kit and connect it as the diagram shows. Power to the insert stays constant, and the switch simply tells the control when to light.
Swapping a wood insert for a gas one
Some fireplaces already hold a wood-burning insert. Replacing it with gas means taking out the wood insert and its chimney liner, then installing the gas insert with its own listed vent system.
They are different appliances with different vents, and the old wood liner cannot stand in for the gas insert's direct-vent liners. We clean and check the chimney once the wood insert is out, before the gas insert goes in.
Permits and inspections for an insert
Gas appliance installations can involve permits and inspections, and the rules depend on where you live. The Supreme manual itself tells installers to consult the local building inspector, fire officials or the authorities having jurisdiction about restrictions, installation inspection and permits.
We check what applies at your address instead of assuming. If a permit is needed, it goes on the estimate, and the inspection is scheduled into the job. Any comments from the inspection are resolved before we consider the job complete.
Other work in Richmond Heights
-
-
- Smoke Chamber RepairRepair the transition above the fireplace opening.
- Ventless Gas Fireplace ServiceService the unit within its exact installation limits.
- Prefab and Zero-Clearance Fireplace RepairRepair the fireplace according to its model.
- Stone Chimney RepairKeep stone repairs suited to the existing masonry.
Learn more about gas fireplace insert installationRichmond Heights services
Richmond Heights homeowners ask about gas inserts
Answers from the family-owned team that fits gas inserts in Richmond Heights.
Who connects the gas line for the insert?
A qualified gas professional runs and connects the supply, as insert manuals require. It appears on its own estimate line with the name of whoever performs it. Our team coordinates the timing with the rest of the job.
Do you service the insert after it is installed?
Yes. Makers recommend a yearly service by a qualified technician, covering the glass seal, logs, embers, venting and cap. We can schedule yours before the cooler months.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.