Gas log installation in Robinswood
An instant fire without the wood. Our local family-owned team measures your fireplace, fits the right log set and tests the flame. 10% off within 72 hours after the inspection.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Line by line, your gas log proposal in Robinswood
Four of the fireplace points our specialists note in Robinswood, priced line by line wherever work is needed.
- Flue, damper and firebox cleaned and checked first
- Minimum damper opening from the set's table
- Noncombustible facing and mantel clearance
- Leak test on every connection made
Gas log installation explained for Robinswood homeowners
Our Robinswood installers go over points like these with every homeowner before ordering.
How the set lights and what stops the gas
Florida's fuel gas code, in section 602.2, wants the main burner of a decorative set lit by direct ignition, by an igniter or by a pilot, backed by a flame safeguard. Sets listed to ANSI Z21.84, the standard for manually lighted sets, are the exception.
The flame safeguard is what stops gas to the burner when the ignition fails. Our technicians check that it works on every set we install or service, and they do not install a burner that lacks one unless its listing allows it.
Clamping the damper open for vented logs
Running a vented set against a shut damper is never allowed. One maker ships a clamp with its set, fixed to the damper blade for good, so the damper can never shut past the minimum opening, and it wants the damper wide open whenever the burner is lit.
The clamp is a small part with a big job, since it stops anyone from shutting the damper on a set that is still warm or about to be lit. Our installers fit it, measure the opening and show you where it is.
Mantel clearance for a vent-free set
With a mantel, one vent-free manual asks for noncombustible material extending at least 8 inches above the opening and a hood accessory when that material is less than 12 inches, plus minimum distances between the opening and the mantel shelf.
If those clearances cannot be met, the same manual says the heater must be operated with the flue damper open. Our crew measures your mantel and facing and tells you which way the set can run.
Fans, drafts and flame patterns
A vent-free flame is sensitive to moving air. One manual warns not to let fans blow directly into the fireplace and to avoid any drafts that alter the burner's flame pattern, and it rules out installing the heater in high traffic, windy or drafty areas.
Ceiling fans, air conditioning registers and doors to the patio can all send air across a firebox. Our crew looks at what moves air around your fireplace and suggests simple changes when a flame is being pushed around.
Discoloration on the grate
Owners sometimes worry when the metal grate under the logs changes color. One maker notes that discoloration is common on the grate after burning.
Discoloration alone is not a reason for repair. Our technicians check that the grate is intact, sits where the manual shows and holds the logs in position, and they tell you when a change is cosmetic and when it is not.
Other work in Robinswood
-
-
-
-
-
Before your gas log install in Robinswood
Log set questions that come up on visits in Robinswood, with plain answers.
Why does the damper have to stay open with gas logs?
The exhaust from a vented set rises up the chimney, which means the flue has to stay open. One maker ships a clamp that is fixed to the damper for good and wants the damper fully open any time the set is lit. Vent-free sets have their own rules in their own manuals.
Can I use logs from a different brand on my burner?
Use the logs listed for your burner. The burner, logs and embers are tested as one set, and one maker warns against adding extra embers because they cause unsafe operation. We order matched parts only.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.