Hearth extension repair done right in Rock Lake

Measuring the opening decides the rest of the plan

Every size question on a hearth goes back to the fireplace opening, meaning its width, its height and whether its bottom sits at floor height or above it. Those three numbers decide which thickness and which extension size the code expects.

Our specialists take them at the start of the visit and write them on the estimate, so the plan for the hearth is tied to your fireplace instead of a generic drawing.

• Width of the opening across the front
• Height from the firebox floor to the top of the opening
• Height of the firebox floor above the extension
• Depth and width of the existing extension

Finding tile that matches an older hearth

The hardest part of many hearth repairs is the match. Tile lines are discontinued, glazes change and even the same product shifts shade between batches.

We start by asking whether spare tiles were left from the original job, since leftovers in an attic or garage often solve the problem. Without them, we show you the closest available options, or suggest a deliberate contrast such as a border that makes the repair look planned.

• Leftover tiles from the original job
• The closest tile available today
• A planned border or contrast band
• A full new finish when nothing fits

A hearth in a fireplace that has sat unused

A fireplace left unused for years often has a hearth that became a shelf, a plant stand or a spot for a television. Loose tiles and cracks can go unnoticed under those objects.

Before the first fire in a long time, we clear the extension, check the finish and the base, and confirm the size against the opening. Any repairs go on a written list, and chimney and firebox checks are scheduled as their own service if they are due.

• Extension cleared and checked
• Finish tapped and looked over
• Size confirmed against the opening
• Chimney and firebox checks booked separately if due

Broken corner pieces on a hearth

Corners and the ends of edge pieces take hard knocks, and they are often the first parts of a hearth to break. A broken corner can expose the setting bed and let ash and moisture into the joint.

We cut out the broken piece cleanly and replace it with a matching corner or edge unit. Where the old profile is no longer made, we suggest a replacement shape for both corners so the hearth stays symmetrical.