Sound masonry chimneys waterproofed in Rock Springs Ridge
Repairs first, then a breathable water repellent on sound masonry. Our local family-owned team in Rock Springs Ridge starts with a free inspection.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Checked before any repellent goes on in Rock Springs Ridge
Four of the points our specialists record on a waterproofing job in Rock Springs Ridge, with upfront pricing on each line.
- Open, cracked or eroded mortar joints to repair first
- Stucco or stone surfaces and the product that suits them
- Roof access and ladder setup for your home
- Your 72-hour 10% discount shown on the estimate
Chimney waterproofing details that matter in Rock Springs Ridge
Here is how our local team thinks through a waterproofing job at your Rock Springs Ridge home.
When an old coating is already on the chimney
Masonry guidance says compatibility with existing treatments has to be settled before a new coat goes on. Reapplying over the wrong layer can cause clouding that is difficult or impossible to remove, and removing an old coating can involve regulated chemicals.
That is why we ask what was used before and look closely at how the surface takes water. An old penetrant may accept a compatible fresh coat. A worn film may need to wear off first. We will not guess, and if we cannot identify a safe path, we tell you so rather than risk the brick.
Keeping repellent off the roof
Makers of chimney repellents warn against getting their product on asphalt-based materials. SaverSystems, for its ChimneySaver water-base repellent, says to protect them from overspray and run-down. On most chimneys, the roof around the base is exactly that kind of surface.
We lay protection on the roofing around the chimney before the first pass and pay attention to rundown along the lowest courses. On tile or metal roofs, we protect the surface as well, since spotting and residue are not what you want on a visible roof. The cleanup check at the end includes the roof, not just the chimney.
What we look at before recommending treatment
A waterproofing recommendation from our team rests on a real inspection. We check the mortar joints for gaps and erosion, the brick faces for cracks and flaking, the crown for cracks and slope, the flashing at the roof line, the cap, and any paint or sealer already on the masonry.
Inside, we look at the firebox and damper area for water marks and ask when you see them. Put together, those findings tell us whether the water is soaking through the brick or getting in somewhere else. That is the difference between a treatment that helps and one that wastes your money.
Mortar color and the treated finish
New mortar from repointing often looks lighter or darker than the old joints for a while. A repellent does not hide that difference, and some products may slightly deepen the color of dense surfaces.
If appearance matters, we talk it through before the work. The joints can be tooled and colored to blend with the old mortar, and the test area shows what the treatment does to both. You see the result on a small section before we commit to the whole chimney.
Other work in Rock Springs Ridge
-
-
-
-
-
Learn more about chimney waterproofingRock Springs Ridge services
Before your waterproofing job in Rock Springs Ridge
Our family-owned team in Rock Springs Ridge answers the questions that come up on sealing jobs.
Will waterproofing stop the water in my fireplace?
Only if the water is soaking through the chimney masonry. Water in the firebox often comes down an uncapped flue or through a cracked crown or failed flashing, and a repellent fixes none of those. Our inspection finds the path first, and the estimate names the repair that stops it.
Will the spray end up on my roof?
It should not. Makers of chimney repellents warn against overspray and run-down on asphalt roofing, and that is usually what surrounds the chimney. We cover the roofing before the first pass, watch the lowest courses for run-down and check the roof, not only the chimney, before we leave.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.