Chimney damper replacement in Roosevelt Park
Stuck, rusted or broken damper? Our local family-owned team repairs it or fits a new one. Free inspection, then 10% off work booked within 72 hours.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
The damper scope we write for Roosevelt Park homes
- Warping or cracks in the casting
- Refractory mortar cure time before use
- Top-sealing damper option where it fits
- Soot cleanup when the job is done
Damper facts for Roosevelt Park homeowners
Cooled air escaping through an open damper
An open or leaking damper acts like a small window left open at the top of the house. Warm air in the chimney rises and pulls cooled indoor air after it, and your air conditioning keeps working to replace it.
A damper that closes firmly between fires stops most of that loss. Our crew repairs dampers that no longer seal and replaces those that cannot, so the fireplace stops leaking air on the days you are not using it.
The difference shows most on hot days, when the air conditioning is working hardest. A closed damper keeps that cooled air in the room where it belongs. If you can feel a draft near the fireplace on those days, the damper is a good place to start.
Sooty smells when the fireplace is idle
A sooty or smoky smell drifting into the room on warm or humid days often means air is moving down the chimney through a damper that does not close tight. The smell comes from deposits inside the flue.
Closing the gap usually cuts the smell sharply. Our technicians check the damper seal and, if the flue needs sweeping, list a chimney sweep separately on the estimate. You decide what to do first.
Smells can also come from a damp flue or animals nesting in the chimney. If the smell has a musty or unusual edge, tell us. Our technicians check for moisture and nesting along with the damper seal.
Measuring the throat for a replacement damper
A replacement throat damper has to fit the opening it sits in. Our technicians measure the throat's width and depth and check how the old frame was set before ordering anything.
The Florida Building Code, Residential, section R1001.6 does not let the passage over the firebox, throat and damper included, get any narrower than the flue. A new damper sized to the throat keeps that passage open when the plate swings back.
Measuring also shows whether the throat has changed over time. Old repairs, cracked firebrick or rust can alter the opening. If the throat is irregular, we explain how that affects the replacement options before anything is ordered.
A top-sealing damper as an alternative
When a throat damper cannot be repaired, or the throat is too damaged to hold a new one, a top-sealing damper is another option. It mounts at the top of the flue and opens and closes with a cable that runs down to the fireplace.
It is a separate service with its own fit questions, the flue size, the condition of the top of the chimney and how you use the fireplace. Our technicians explain both options side by side so you can choose.
A top-sealing damper also changes your routine a little. The cable handle sits inside the fireplace, and the damper has to be opened before every fire. Our technicians show you how it works so the change is easy to live with.
Other work in Roosevelt Park
-
-
-
-
-
-
Learn more about chimney damper repair and replacementRoosevelt Park services
Damper repair questions we hear often
Can a damper at the top of the chimney take the place of mine?
Sometimes. A top-sealing damper mounts on the flue at the top of the chimney and opens and closes with a cable. Whether it suits your fireplace depends on the flue and how you use the fireplace, and our technician explains both options before you choose.
I can see daylight around the closed damper. Is that a problem?
It means the plate is not closing all the way, usually because it is warped, something sits on its seat or the control stops short. Cooled air slips out through that gap on hot days. We find which cause it is, fix it and look for light again before we leave.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.