Skip to content

Proudly American | Family owned

Same-day service available

(352) 675-6376 Book Online

Wood inserts installed with a full liner in Rose Isle

Wood stove inserts installed in Rose Isle by a family-owned team that treats your home like its own.

  • Licensed & insured
  • Locally run
  • Family owned and operated
  • Same-day service available
4.8 out of 5 from 736 reviews
  • Google
  • Yelp
  • Facebook

Measured at your Rose Isle fireplace, then written down

None of this comes from a brochure. Our installers confirm it at your fireplace during the free visit.

  1. Chimney height checked against the model's minimum
  2. Top plate sealed on the flue tile with a rain cap
  3. Hearth depth and width checked, extension if needed
  4. Gas line in the firebox capped by a gas contractor, listed separately

Before an insert slides into your Rose Isle fireplace

Explained by the crew that lines and fits inserts in Rose Isle.

Fireplace repairs finish before the insert goes in

Insert manuals ask for the fireplace to be examined for cracks, loose mortar and other defects, and for any repairs to be completed before installation. Travis Industries puts it simply: the entire fireplace, including the chimney, must be clean and undamaged. Once the insert and surround are in, the firebox behind them is hard to reach.

If our inspection turns up damage, the repair is written as its own item with its own scope, separate from the insert work. You decide on both with the facts in front of you, and nothing is closed up behind a surround to make the job look finished.

Room air and a surround left unsealed

The second route in the Pacific guide uses room air. The insert is installed as described, and the surround is deliberately not sealed to the fireplace, so enough air can enter the fireplace cavity and reach the insert. An air cover can also be removed for more supply.

Which route applies depends on the model and on the fireplace. We follow the one the manual names for your setup and explain why, so a later handyman does not caulk a gap that was left open on purpose.

Can an existing liner be reused

A liner already in the chimney may or may not suit a new insert. It must be the size the new manual asks for, be a type the new maker accepts, be in sound condition and connect properly to the new collar.

We check an existing liner's size and condition from the top and the bottom, and we say plainly whether it can stay. If it cannot, the estimate explains why, rather than quoting a new liner as a default.

Keeping birds and animals out of the chimney

An open flue is an invitation to birds and small animals, and a nest in the space around a new liner is hard to reach. The top plate and the rain cap together close the top of the chimney around the liner.

We check for nesting before any work starts, because active nests of some protected species change what can be done and when. When the top is finished, it should leave nothing for an animal to enter.

What Rose Isle homeowners want to know about wood inserts

Answered by the family-owned team that fits inserts in Rose Isle.

Can the insert share a flue with another appliance?

No. Both insert manuals we work from say not to connect the insert to a flue that already serves another appliance. Where the chimney has several flues, we confirm which one belongs to the fireplace and keep the insert on it alone.

Can the glass door stay open while the fire burns?

No. The insert manuals we work from say the insert runs with the door closed and latched. Open it to load wood, then close and latch it again.

Request your free estimate

Share the job details and arrange a free inspection with our local team.

  • Free inspection
  • No hidden fees
  • Family owned and operated

Need an answer now? Call (352) 675-6376

Tell us what needs attention. We will contact you to arrange your free inspection.

Call(352) 675-6376