Chimney chase repair for Rosemont homeowners
Stucco over a framed chase rebuilt with two barrier layers, corrosion-resistant lath and three full coats.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
The chase layers we price for Rosemont homes
- Sheathing replaced back to firm wood
- Trim primed, installed and sealed at joints
- Cover replacement listed as its own line
- Added work priced in writing before it starts
Chase repair details that keep the wall dry
A chase that hangs off the wall on a framed floor
A cantilevered chase never reaches the ground. It sticks out from the house wall at fireplace height or higher, sitting on a small framed floor with a soffit panel underneath. From below it looks like a narrow bay built around the chimney.
That floor and soffit belong to the chase. Water running down inside the box collects on the floor framing, and a sagging soffit or a stained underside panel is often the first sign. Rot there can spread to the joists that tie the small floor back to the house wall, so the floor gets probed along with the walls.
When we open a cantilevered chase, the floor joists, the soffit and the connection to the house wall get checked together. Your estimate lists the soffit and any floor framing as their own items. The soffit panels usually come down first, since they show the floor framing from below without opening the walls.
Fiber-cement siding joints on a chase
Fiber-cement siding holds up well on a chase when its joints get the right detail. For panels, R703.10.1 puts vertical and horizontal joints over framing and protects them with caulking, battens, flashing or shiplap. For lap siding, R703.10.2 protects the ends with caulking, an H-section joint cover or a strip of flashing behind the joint. Fasteners follow the code table or the maker's instructions.
An unprotected joint lets water reach the cut edges and the sheathing behind them. Face nails driven too deep break the surface and give water another way in.
We cut and seal new fiber-cement pieces as the maker directs, protect the joints and set nails flush. Paint follows soon after installation, so no bare edge is left out in the weather. The estimate names the siding product and the joint detail we will use. Where old and new pieces meet, the joint is detailed the same way, so the patch does not become the next leak.
The yearly check that includes the chase
NFPA 211 sets a yearly inspection of chimneys, fireplaces and vents, checking that they are sound, free of deposits and properly clear of combustibles, with cleaning, upkeep and repairs wherever the inspection finds a need. On a factory-built system, the chase around the chimney is a sensible part of that look.
A yearly look catches open joints, lifted flashing and soft spots while they are small. It is also a chance to confirm that nothing has been stored, run or packed into the air space since the last visit. On a stucco chase, it is also when new hairline cracks and hollow spots are easiest to catch and seal.
Our technicians include the chase walls, trim, base flashing and attic side in the yearly check for homes in Rosemont. Anything that needs repair goes into a written estimate you can act on now or keep for later. If nothing needs work, you hear that too.
After a storm tears siding off the chase
High wind can strip siding, trim or stucco off one face of a chase and leave the sheathing bare. Rain that follows goes straight into the wall, so a quick temporary cover can limit how far the water gets. Loose pieces on the roof can slide off in the next gust, so they are gathered up before anything else.
Storm damage is a good time to check the whole chase, not only the torn face. Wind that pulled siding loose may also have loosened fasteners, lifted flashing or bent the cover on another side. Siding or trim that landed on the roof may have scraped or punctured the roofing, which your roofer should see.
Our crew puts temporary protection in place, then inspects the full chase and writes a repair estimate that separates fresh storm damage from older rot. That split shows plainly what the storm did and what was already there before it.
Other work in Rosemont
-
-
-
-
Chase repair questions we hear
Do you work with my roofer?
Yes. Flashing at the chase base sits between the roof and the chase, so we agree with your roofer on who replaces which pieces before work starts. The written estimate spells out that split.
Is there a 10% discount for chase work?
Yes. Chase repair booked within 72 hours after your free inspection is 10% off. Mention it when you book so it is applied to your chase work.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.