Family-owned wood fireplace installation in Sky Lake
Wood-burning fireplaces installed in Sky Lake by a family-owned team that treats your home like its own.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Every item on your Sky Lake fireplace estimate
Our family-owned crew measures, notes and explains each point in plain words at your Sky Lake home.
- Air space kept around the fireplace and chimney
- Masonry footing, firebox and hearth to code
- Electrical work by an electrician, listed separately
- Our workmanship warranty on the fireplace work we do
What a new fireplace asks of your Sky Lake home
How the manual, the code and your house shape the plan in Sky Lake.
The code's exterior air rule
Florida Residential Code section R1006.1 says factory-built or masonry fireplaces shall be equipped with an exterior air supply to ensure proper fuel combustion, unless the room is mechanically ventilated and controlled so that the indoor pressure is neutral or positive.
For most new fireplaces that means an outside air supply is part of the project. We explain how the rule applies to your house and your model, and the air supply appears on the estimate as its own item rather than an afterthought.
Measuring the ten-foot rule on a sloped roof
When the horizontal distance from the chimney to the peak of the roof is more than 10 feet, the manual describes setting a reference point on the roof surface 10 feet from the side of the chimney. The top of the chimney must be at least 2 feet above that point, and never less than 3 feet above the roof penetration.
On a steep roof, that reference point can make the chimney taller than people expect. We measure it at the planning visit, so the height and the number of sections are known before anything is ordered.
Wood trim close to the opening
The same manual allows combustible trim that projects no more than an inch and a half from the face to sit no closer than 6 inches from the top of the opening, and says combustible trim must never cover the black metal surfaces of the fireplace.
Wood trim is where finish carpenters and fireplace manuals most often disagree. We share the manual's trim rules with whoever is doing the finish work, so the casing and the surround are cut correctly the first time.
Adjusting the framing for a replacement unit
A replacement fireplace rarely has exactly the same framed opening, standoffs and cavity depth as the one it replaces. The new manual's table decides the opening, and the framing is adjusted to it.
We measure the old opening against the new unit's requirements and write any reframing into the estimate. It is usually modest work, a few studs and a new header, and it is far better than forcing a unit into a cavity built for a different model and losing the air space the listing depends on.
Other work in Sky Lake
-
-
-
-
What Sky Lake homeowners want to know about adding a fireplace
If we missed your question, our Sky Lake fireplace team answers the phone.
What paperwork should stay with the house afterwards?
The manual, the model and serial number, the chimney parts list, the permit record and the date it went in. We hand them over together, and the listing label stays reachable on the unit, so a later inspection, repair or sale can start from the facts.
Does an addition with a fireplace need a carbon monoxide alarm?
Under Florida Statutes section 553.885, a new building or addition with a fireplace gets an approved, working carbon monoxide alarm no more than 10 feet from each bedroom, or wherever the building code places it. We raise it while planning and price the alarm work on its own line.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.