Hearth tile and stone repair in Sky Lake

Slate hearth tiles that flake or split

Slate splits in layers, and on a hearth those layers can begin to lift at the edges of a tile. A flaking surface catches ash, looks worn and gets worse under foot traffic.

Light flaking can sometimes be trimmed back and sealed. Tiles coming apart deeper are replaced. Because slate varies from lot to lot, we discuss color and thickness before ordering, so the new tiles sit flush with the old ones.

• Light flaking trimmed and sealed
• Deeper splits replaced
• New tiles matched for color and thickness

Missing or crumbling grout on a tiled hearth

Grout locks tiles together and keeps ash and debris out of the bed. Once it cracks and falls out, tiles move independently, edges chip and the hollow spots spread.

If the tiles are still firmly set, the fix is to rake out the damaged grout and regrout with a product suited to the location, matched to the existing color as closely as practical. If tiles are loose too, we reset those first. You see the difference between the two scopes in writing.

• Damaged grout raked out
• Loose tiles reset first
• Grout color matched as closely as practical
• Sealer applied where the material calls for it

Matching grout color on a partial repair

New grout beside old grout rarely matches on day one. Old grout has picked up ash, cleaning products and years of foot traffic, and fresh grout dries to its true color over time.

We clean the existing grout near the repair before choosing a color, test it where it will not show and explain how close the match is likely to be. When the difference would stand out, regrouting the whole hearth gives an even result.

Cleaning a hearth without damaging it

Ash, soot and spills are part of a working hearth. Acidic cleaners can etch marble and limestone, abrasive pads scratch glazed tile, and harsh products can wash out grout color.

After a repair we leave you with cleaning advice for your specific finish, including what to avoid. A gentle routine keeps the new work looking the way it did on the day we finished.

• No acidic cleaners on marble or limestone
• No abrasive pads on glazed tile
• Gentle products that keep grout color