Rock and fieldstone chimney repair in South Apopka
Know the findings, the options and the price for your South Apopka stone chimney before you say yes to anything.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Points we price on a stone job in South Apopka
Loose stone in South Apopka traces back to something on this list, and the estimate says what.
- Cap overhang and drip edge checked
- Failed mortar removed by hand where possible
- Deep joints filled in layers
- Flue and liner work listed separately
Stone chimney repair details for South Apopka homes
What our specialists in South Apopka check on every stone chimney they climb.
Metal lath and how it is fastened
Lath gives the scratch coat something to grip. The instructions we follow call for lath installed to ASTM C1063, typically with corrosion-resistant fasteners every 6 inches vertically and 16 inches horizontally into framing, and self-furred so mortar can wrap behind it.
When we open failed veneer, lath tells a story. Rusted, loose or poorly fastened lath explains stones that pull away in sheets. We replace damaged lath before building the backing back up, and we note the fastening in the findings.
White bloom on stone veneer
Efflorescence is a water-soluble deposit left on masonry as water evaporates from the wall. For manufactured stone, one maker advises letting the stone dry thoroughly, then scrubbing with a stiff bristle brush and clean water, and for stubborn cases a solution of one part white household vinegar to five parts water, rinsed thoroughly.
Cleaning treats the symptom. The water that carried the deposits out is the real finding, and we trace it to the cap, the flashing or the base before calling the job done.
Water stains inside near a stone chimney
Stains on a ceiling or wall beside a stone chimney can come from the flashing, the cap, open joints or water behind veneer. The stain inside does not always sit directly below the entry point.
We check the outside of the chimney from the roof and the base, and the attic where it is accessible, to find the path. Leak repairs that are not stone work, such as flashing or cap work, are quoted on their own lines.
Opening a small area to see behind the stone
Some questions only get answered by looking. With your approval, we remove a few stones in the affected area to see the setting bed, the scratch coat, the lath and the barrier behind them.
That small opening often decides the whole plan, from a simple reset to rebuilding the backing over a larger area. The removed stones are kept, cleaned and reset, and the opening and its price are written into the plan beforehand.
Chimneys that mix brick and stone
Some chimneys combine materials, a stone base with a brick upper section, or stone facing on a brick core. Brick and stone take different mortars, different joint styles and sometimes different repair methods.
We treat each part on its own terms and name both in the estimate. Brick sections are handled under brick repair, and the stone portions under this work, so it is clear what is being done to each.
Other work in South Apopka
-
-
-
-
-
Quick stonework facts for South Apopka chimneys
Missing your question? Our South Apopka masons will answer it by phone.
How do I know if my chimney is natural stone or veneer?
Thin stones with a flat back over a mortar bed, a metal screed at the base or a framed chase usually mean manufactured or thin veneer. Solid stone chimneys have thick units that pass through the wall. We identify yours at the free inspection.
How often should a stone chimney be inspected?
Under NFPA 211, a chimney, its fireplace and its vents are inspected every year at a minimum. For a stone chimney, that yearly visit is a good time to tap the stones, check the joints and look at the cap and flashing.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.