Brick chimney repair from local pros in South Eola
Mortar chosen for your existing masonry, not the strongest bag on the shelf. Chimney masonry experts serving South Eola.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
The written masonry scope for your South Eola home
Your masonry scope in South Eola starts here, drawn from sound brick to sound brick.
- Loose or displaced masonry near the top
- Water sources feeding the damage
- Curing and weather planning for fresh mortar
- 10% off within 72 hours after the inspection, shown on the estimate
Brick and mortar facts our masons share in South Eola
What we look for on masonry jobs in South Eola, with the guidance behind each step.
Stopping the water before the repair
One rule closes the brick industry's maintenance guidance. If a masonry problem is moisture related, the source of the moisture should be found and corrected before other repairs begin.
On chimneys, the usual suspects are the crown, the cap, the flashing, open joints and anything that sprays or spills onto the brick. We look at each, and any repair outside the masonry scope appears on its own line, so the new brick and mortar are not left fighting the same water.
Removing failed patches and sealant
Sealant smeared over a crack, or mortar pasted onto the face of old joints, can trap water and hide what is happening underneath. It also leaves nothing sound for new work to bond to.
Within the repair area, we remove those patches back to sound masonry before repairing. Brick industry guidance treats sealant joints as their own maintenance item, and a smear of caulk across masonry is not one of them. We also tell you what the patch was hiding, since the condition under it is often the real reason the repair is needed.
Keeping brick faces clean during pointing
Mortar smeared across brick faces during repair is hard to remove once it sets and can leave a haze that outlines every repaired joint.
We work neatly at the joint, clean excess mortar from the faces before it hardens and brush the finished joints once they have firmed up. Brick industry guidance even suggests masking or a template for face grouting, for the same reason. Clean faces are also why the finished joints read as a single, even repair rather than a series of patches with haze around them.
Rust stains on chimney masonry
Rust streaks on masonry usually start at metal parts, such as a cap, a bracket, an old fastener or steel inside the masonry. The stain points to the source but does not say how serious it is.
We find where the rust is coming from. A surface stain from a cap is a small matter, while rust from steel inside the masonry can be a structural concern, and the estimate explains which you have. Surface staining can often be cleaned once its source is dealt with, using a product made for brick and tested on a small area first.
Other work in South Eola
-
-
-
-
Related chimney masonry work
Chimney masonry questions from South Eola
Our family-owned crew in South Eola answers what homeowners ask about chimney brick.
Do cracked mortar joints mean my chimney is unsafe?
Not usually on their own. Hairline cracks and worn joints are maintenance items, while wide cracks, cracks through several bricks, stepped or diagonal patterns and a leaning chimney point to movement that needs a closer look. We tell you which you have.
Why are there white deposits on my chimney?
White deposits usually mean water is moving through the masonry and leaving dissolved minerals behind as it dries. Brick industry guidance says to find and fix the water source first, or the deposits come back. We look for that source during the inspection.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.