Gas fireplace inserts fitted for South Semoran homes
A gas insert installed to the maker's instructions in South Semoran, with the barrier screen in place and the controls explained.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Gas insert scope we confirm in South Semoran
An insert has to suit the firebox, the chimney and the gas supply. In South Semoran, we confirm points like these at the free inspection.
- Chimney passageway examined and cleaned before connection
- Termination cap sealed and secured to the chimney top plate
- Shutoff valve location and service slack in the gas line
- Removal and disposal of old doors, screen and grate
Gas insert installation points for South Semoran homes
How our South Semoran crew orders the work, and which decisions stay yours.
The floor in front of the insert
An insert pushes heat out into the room, and the floor in front of it has to cope with that. Heat & Glo's Supreme manual recommends a small hearth or a set distance where vinyl flooring meets the insert, advises against adhesive-based vinyl because of thermal expansion and notes that floating floors can be used but will get warm, so the flooring maker's specifications should be checked.
A raised stone or tile hearth usually works as it is. Where flooring runs right up to the opening, we check it against the manual for your model and tell you what, if anything, has to change.
Air in a new gas line
A newly connected gas line holds some air. The manual explains that this small amount of air must be purged, and that lighting the appliance lets it purge through the pilot assembly.
That is why a new insert can take a few tries to light the first time. Our technician handles the first lighting, watches the pilot and the burner come up and stays until the flame is steady. If the pilot will not stay lit after a reasonable number of tries, we stop and find the cause instead of forcing it.
How close a wood mantel can sit
A wood mantel above the fireplace is a combustible projection, and an insert puts out real heat at its face. Insert manuals give minimum distances from the top of the surround to a combustible mantel, and those distances grow as the mantel sticks out further.
We measure your mantel's height and depth and check them against the table for the insert you want. If the mantel is too low for that model, you hear it at the inspection, together with the choices, such as a different insert or moving the mantel.
Moisture on the glass at startup
Water droplets on the inside of the glass when the insert first lights are a normal result of burning gas. Heat & Glo's owner's manual adds a point for summer: warm, humid outdoor air inside the firebox can condense on glass that air conditioning has cooled below the dew point.
The moisture clears as the glass warms. We mention it at handover, so nobody mistakes it for a crack or a fault on a muggy evening.
Other work in South Semoran
-
-
-
-
-
-
Learn more about gas fireplace insert installationSouth Semoran services
Your gas insert questions, South Semoran edition
Questions South Semoran homeowners ask before converting a fireplace, answered by the installers.
Will you fit an insert I already purchased?
Gladly, as long as it suits your fireplace. Give us the model number when you call, and the installer reviews its opening and vent requirements before arriving. If it cannot fit, you find out while there is still time to return it.
What happens to my old damper?
It is locked fully open or removed, as the insert manual directs, so the liners can pass through. The gap around the liners is then closed with the material the manual allows.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.