Fireplace insert installation by local installers in Southport
Measured, planned in writing and installed to the listing. That is how our Southport team fits every wood insert.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
What the insert plan for your Southport home includes
Checked once, carefully, so install day in Southport runs without a second visit.
- Chimney height checked against the model's minimum
- Top plate sealed on the flue tile with a rain cap
- Blower cord route and outlet, electrician work listed separately
- Our workmanship warranty on the insert work we do
The flue, the fit and the fire, for Southport inserts
What our installers look for, and why it matters, on Southport insert jobs.
Closing the top of the flue around the liner
At the chimney top, the liner passes through a stainless plate trimmed to sit on the flue tile. The Pacific guide describes an overlap of about an inch to an inch and a half on each side, the plate screwed to the liner, the gap sealed with RTV silicone and a rain cap fitted to the liner end.
That closure keeps rain, leaves and animals out of the space between the liner and the old flue. Because it is roof work, the estimate states how the crew will reach the chimney top and how the roof covering is protected while they work up there.
What may come off a factory-built fireplace
Altering a factory-built fireplace is not permitted beyond two exceptions in the Pacific guide. External trim that does not affect operation may be removed and stored with the fireplace for reassembly if the insert ever comes out, and the chimney damper may be removed to install the liner.
Anything beyond that, such as cutting the firebox panels or removing a smoke shield, falls outside what the manual allows. Our installers keep to those limits and bag the removed trim, so the fireplace can be put back the way it was built.
The paperwork that stays with the house
An insert installation produces documents worth keeping: the owner's manual, the model and serial number, the liner type, size and length, the surround size and the date of installation. Most of that information disappears behind the surround the moment the job is finished.
We leave those records with you in one place. A future sweep, inspector or buyer will ask for them, and having them means nobody has to pull the surround to find out what the fireplace is connected to. Registering the unit with its maker is worth doing the same week.
Protecting floors and furniture on install day
An insert installation carries a heavy unit, sooty old parts and a coil of liner through the house. Our crew lays protection along the route from the door to the hearth and covers furniture close to the work.
The firebox is cleaned before the insert goes in, and the work area is cleaned again when we finish. Both steps are part of the written scope, so the room you get back is the room you lent us, with a new fire in it.
Other work in Southport
-
-
-
-
-
Learn more about wood-burning fireplace insert installationSouthport services
Answers on wood inserts for Southport households
Honest answers from our Southport insert specialists, no pressure attached.
Does the old fireplace need repairs before the insert goes in?
Often, yes. The manuals ask for the fireplace and chimney to be clean and sound, with cracked or loose mortar repaired first. Any repair we find is priced on its own line, so you can see it apart from the insert.
How should I get rid of the ashes?
Scoop them into a metal container with a tight-fitting lid, and leave it on a noncombustible surface, clear of anything that burns, until the ashes are cold. Insert manuals give the same instruction.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.