A new fireplace framed, installed and finished in Spring Isle
A real wood fire for your Spring Isle home, with the chimney, hearth and outside air done right. 10% off work booked within 72 hours after the inspection.
- Licensed & insured
- Locally run
- Family owned and operated
- Same-day service available
Fireplace installation items we confirm in your Spring Isle home
Upfront pricing sits beside each item, so you can see where the fireplace budget goes in Spring Isle.
- Roof height set by the ten-foot rule
- Noncombustible face finish chosen with you
- Old fireplace and chimney removed and hauled away
- Our workmanship warranty on the fireplace work we do
What a proper fireplace installation involves in Spring Isle
From our family-owned crew, the details that decide how a new fireplace works.
A factory-built fireplace follows its listing
Florida Residential Code section R1004.1 says factory-built fireplaces shall be listed and labeled and installed in accordance with the conditions of the listing. In practice that means the manual that ships with the unit carries the weight of the code itself.
Framing dimensions, air spaces, chimney parts, hearth extension, mantel height and approved accessories all come from that document. Our installers read it for your model before the framing is drawn, and the written plan you approve follows it line by line.
Taking the old fireplace out
Removing a factory-built fireplace means opening the face finish, disconnecting the chimney, lifting out the pipe sections and sliding the firebox out through the room. The old chimney is usually removed from the roof down.
Our crew protects the floor and furniture, keeps the roof opening closed at the end of each day and hauls the old unit away when that is in the scope. Removal and disposal are separate lines on the estimate, and the room is cleaned before the new fireplace arrives.
A chimney through a second floor
In a two-story house, the chimney may have to pass through a bedroom, a closet or a framed chase on the upper floor. Every floor it crosses needs a firestop spacer, and every enclosure around it needs the manual's air space kept clear on all sides.
We plan that path with you, often through a closet corner or along an exterior wall, so the enclosure lands where it takes the least from the room above. The route is agreed on paper before any ceiling is opened.
Checking the draft on the first fire
The first fire in a new fireplace is also the first test of the whole system. With the damper open, smoke should rise cleanly into the top of the firebox, and the house should not pull it back into the room when a door opens or the air conditioning starts.
We watch that first fire with you, check the draft with the doors open and closed and look at the chimney top once the fire is going. If anything needs adjusting, we say so on the spot rather than after we have packed up.
Other work in Spring Isle
-
-
-
-
-
-
What Spring Isle homeowners want to know about adding a fireplace
Answered by the family-owned team that builds fireplaces in Spring Isle.
What happens where the chimney passes through attic insulation?
Section R1005.8 calls for a steel insulation shield at least 0.0187 inch thick wherever a factory-built chimney crosses insulated space, so the insulation stays off the pipe. We fit the shield listed for your chimney system and check the insulation around it before we leave the attic.
Does an addition with a fireplace need a carbon monoxide alarm?
Under Florida Statutes section 553.885, a new building or addition with a fireplace gets an approved, working carbon monoxide alarm no more than 10 feet from each bedroom, or wherever the building code places it. We raise it while planning and price the alarm work on its own line.
Request your free estimate
Share the job details and arrange a free inspection with our local team.
- Free inspection
- No hidden fees
- Family owned and operated
Need an answer now? Call (352) 675-6376
Your request is received
Thank you. We will contact you to discuss the job and confirm an appointment.